Cisco 9951 Standard Manuale di configurazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di configurazione per Telefono IP Cisco 9951 Standard. Cisco 9951 Standard 4. Cisco systems telephone
Anche per Cisco 9951 Standard: Scheda tecnica (7 pagine), Note di rilascio (16 pagine), Manuale d'uso (12 pagine), Panoramica (30 pagine), Manuale di amministrazione (8 pagine), Manuale d'uso (48 pagine), Avvio rapido (2 pagine), Manuale d'uso (22 pagine), Impostazione (4 pagine), Manuale di avvio rapido (8 pagine), Manuale di avvio rapido (2 pagine), Manuale d'uso (23 pagine), (Portoghese) Manuale di avvio rapido (2 pagine)

Post-Installation Steps

Select Accessories.

Step 2

Highlight Cisco Unified Camera.

Step 3

Press the Set-up softkey.

Step 4

Press the Turn On or Turn Off softkey.

Step 5

Post-Installation Steps

After installing the Cisco Unified Video Camera, perform the following checks:

Using the Cisco Unified Video Camera

For information about placing and receiving video calls, setting up video conferences, and adjusting

camera settings on the phone, see the Cisco Unified Video Camera Quick Start Guide at this location:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/9971_9951_8961/8_0/english/user/qsg/qs99

camen80.pdf

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.0 (SIP)

5-4

Wait till the "camera ready" message appears.

Note

The camera may need to upgrade after installation. This may take a few minutes before the

camera is operational.

Press the Video Preview softkey to check the picture quality.

If the video preview image looks too blue, try increasing the camera Brightness setting.

–

If the background looks washed out, try decreasing the camera Brightness setting.

–

Note

For information about adjusting camera settings on the phone, see the Cisco Unified Video

Camera Quick Start Guide at this location:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/9971_9951_8961/8_0/english/u

ser/qsg/qs99camen80.pdf

Move the phone/camera to a position where there are no bright lights in the field of view.

Move the phone/camera so that the user is illuminated by light coming from the front.

Chapter 5

Setting Up the Cisco Unified Video Camera

OL-20862-01