Cisco Cisco Unified IP Phone 7960G Manuale del telefono - Pagina 10

Sfoglia online o scarica il pdf Manuale del telefono per Telefono IP Cisco Cisco Unified IP Phone 7960G. Cisco Cisco Unified IP Phone 7960G 17. Ios telephony services ip phone
Anche per Cisco Cisco Unified IP Phone 7960G: Manuale d'uso (21 pagine), Manuale d'uso (25 pagine), Riferimento rapido (2 pagine), Manuale di riferimento rapido (2 pagine), Manuale d'uso (20 pagine), Manuale d'uso (28 pagine), Manuale dell'amministratore (15 pagine), Manuale di installazione (12 pagine), Manuale d'uso (16 pagine), Manuale di riferimento (24 pagine), Manuale di amministrazione (29 pagine), Manuale (21 pagine), Manuale d'uso (10 pagine)

Customizing Phone Settings

The following table describes how to customize the ringer and the LCD contrast on your phone.

If you want to...

Change the ringer sound

Change the LCD contrast

The following table describes how to use Hold and Resume on your phone. (Some of these steps might

not apply to MGCP phones.)

If you

Want to put a call on hold

Want to return to the held call

Have multiple calls on multiple lines on

hold

Because engaging the Hold feature generates music or a beeping tone, avoid putting a

Tip

conference call on hold.

Then...

Press the Settings button and choose

Settings > Ring Type and then press the Select softkey.

Press the up or down Navigation button to scroll

through the ring types. Press the Play softkey to hear the

selected ring type. When you find the ring you want,

press Select and then the OK softkey.

Press the Save softkey to save your selection and exit the

Settings menu. (This does not apply to MGCP phones.)

Press the Settings button and choose

Settings > Contrast. Press the Up or Down softkeys (or

the Volume buttons) to set the desired display contrast.

Press the OK softkey to accept your changes.

Then...

Press the Hold softkey.

Press the Resume softkey. If multiple calls are on hold,

use the Navigation button to select the desired call

before you press Resume.

Press the line button for the line to which you want to

switch, and then use the Navigation button to select the

desired call. Press Resume.