Cisco CP-7910GSW Manuale introduttivo - Pagina 24

Sfoglia online o scarica il pdf Manuale introduttivo per Telefono IP Cisco CP-7910GSW. Cisco CP-7910GSW 34. Getting started guide

Making Telephone Calls

Redialing the Last Number Dialed

Step 1

Step 2

Step 3

Getting Started with the Cisco IP Phone 7910 Series

3-8

To redial the most recently dialed number, lift the handset and press the redial

button.

Redial is an optional feature configured by your system administrator. Although

your phone supports this feature by default, your system administrator might have

removed this feature from your phone.

You can store or "park" a call at a specified number and then use any other phone

(for example, a phone in someone else's office or in a conference room) to retrieve

the call.

Call Park is an optional feature configured by your system administrator; your

phone does not support this feature by default. Call Park is only available if your

system administrator configured your phone to support it.

During an active call, press the park button.

The display shows the number to which the call is parked.

Make a note of the Call Park number and then hang up. The call is now parked at

that number, allowing you to retrieve it from another phone.

Note

You have a reasonable but limited amount of time to retrieve

the parked call before it disconnects. See your system

administrator for more information.

To retrieve the parked call from any phone in the Cisco CallManager system, dial

the Call Park number at which the call was parked.

Chapter 3

Using the Cisco IP Phone 7910 Series

78-11443-02