Cisco Linksys WIP310 Manuale d'uso - Pagina 34
Sfoglia online o scarica il pdf Manuale d'uso per Telefono IP Cisco Linksys WIP310. Cisco Linksys WIP310 35. Wireless-g ip phone
Stampa la pagina
AppendixC
Product Usage Restrictions
This product is designed for indoor usage only . Outdoor usage is not recommended, unless otherwise noted .
2,4 GHz Restrictions
This product is designed for use with the standard, integral or dedicated (external) antenna(s) that is/are shipped together with
the equipment . However, some applications may require the antenna(s), if removable, to be separated from the product and
installed remotely from the device by using extension cables . For these applications, Linksys offers an R-SMA extension cable
(AC9SMA) and an R-TNC extension cable (AC9TNC) . Both of these cables are 9 meters long and have a cable loss (attenuation)
of 5 dB . To compensate for the attenuation, Linksys also offers higher gain antennas, the HGA7S (with R-SMA connector) and
HGA7T (with R-TNC connector) . These antennas have a gain of 7 dBi and may only be used with either the R-SMA or R-TNC
extension cable .
Combinations of extension cables and antennas resulting in a radiated power level exceeding 100 mW EIRP are illegal .
Power Output of Your Device
To comply with your country's regulations, you may have to change the power output of your wireless device . Proceed to the
appropriate section for your device .
NOTE:
The power output setting may not be available on all wireless products . For more information, refer to the
documentation on your product's CD or at www.lnksys.com/nternatonal
Wireless Adapters
For wireless adapters operating in the 2,4-GHz band, the typical radiated output power is 18 dBm EIRP, while the maximum
radiated output power will not exceed 20 dBm
(100 mW) EIRP . For wireless adapters operating in the 5-GHz band, the typical radiated output power is 20 dBm EIRP, while the
maximum radiated output power will not exceed 23 dBm (200 mW) EIRP . If you need to alter your wireless adapter's power
output, follow the appropriate instructions for your computer's operating system:
Windows XP
1 .
Double-click the Wreless icon in your desktop's system tray .
2 .
Open the Wireless Network Connection window .
3 .
Click the Propertes button .
Select the General tab, and click the Confgure button .
4 .
5 .
In the Properties window, click the Advanced tab .
6 .
Select Power Output .
7 .
From the pull-down menu on the right, select the adapter's power output percentage .
Windows 2000
1 .
Open the Control Panel .
Double-click Network and Dal-Up Connectons .
2 .
3 .
Select your current wireless connection, and select Propertes .
4 .
From the Properties screen, click the Confgure button .
5 .
Click the Advanced tab, and select Power Output .
6 .
From the pull-down menu on the right, select the adapter's power setting .
If your computer is running Windows Millennium or 98, then refer to Windows Help for instructions on how to access the
advanced settings of a network adapter .
Wireless-G IP Phone
Warranty and Regulatory Information