Ricoh 4700WD Impostazioni di sistema - Pagina 28

Sfoglia online o scarica il pdf Impostazioni di sistema per Stampante All in One Ricoh 4700WD. Ricoh 4700WD 42. Savin copier operating instructions

Stampa la pagina
Ricoh 4700WD Impostazioni di sistema
DolphinGB-Syst-F_V4_FM.book Page 16 Wednesday, May 2, 2001 1:19 PM
User Tools (System Settings)
Settings You Can Change with the User
Tools
For details on how to display the settings, see p.13 "Accessing the User Tools
(System Settings)".
2

General Features 1/3

❖ ❖ ❖ ❖ Fusing Adjustment: Paper Tray
Specifies the characteristics of the paper roll in the paper tray. If the image on
copies is scratched, or the paper wrinkles when using translucent paper, you
can change the setting to get better copies.
You can specify separate settings for Plain, Translucent paper, and Film.
Note
❒ Default: 3
❒ The paper thickness can be set from 1 (Thicker) to 5 (Thinner).
❒ Refer to the chart below when selecting the mode for the paper thickness.
Mode
Paper Type
Plain paper
Translucent
paper
Film
*1
Out of guarantee
❒ Depending on the type of paper and the operating conditions, the toner
fusing condition changes. To improve the toner fusing, change the mode
setting to 3→2→1.
❒ When using thin paper, or soft, limp paper, the toner fusing may be wrin-
kled or the image may be blurred. In these cases, change the setting to
mode 3→4→5.
❒ When using Film, do not set to mode 5.
16
1
2
2
2
110g/m
90g/m
(29.3 lb)
(23.9 lb)
2
2
70 – 90g/m
70 – 80g/m
(18.6 – 29.3 lb)
(18.6 – 21.3 lb)
* If the paper wrinkles when using mode 3,
try using mode 2 or mode 1.
0.07mm –
0.07mm –
0.095mm
0.095mm
(2.8 Mil – 3.7
(2.8 Mil – 3.7
Mil)
Mil)
3
4
2
2
70g/m
60g/m
(Standard
(15.9 lb)
mode)
(18.6 lb)
2
2
70 – 80g/m
50 – 70g/m
(18.6 – 21.3 lb)
(13.3 – 18.6 lb)
(Standard
mode)
0.07mm –
0.07mm –
0.095mm
0.095mm
(2.8 Mil – 3.7
(2.8 Mil – 3.7
Mil) (Stand-
Mil) (Stand-
ard mode)
ard mode)
5
2
50g/m
(13.3 lb)
2
50-60 g/m
(13.3-15.9 lb)
*1
—