Ricoh SP 212w Manuale di configurazione - Pagina 22

Sfoglia online o scarica il pdf Manuale di configurazione per Stampante All in One Ricoh SP 212w. Ricoh SP 212w 25.
Anche per Ricoh SP 212w: Manuale di configurazione (24 pagine), Manuale di configurazione (24 pagine), Manuale di configurazione (24 pagine), Manuale di configurazione (24 pagine), Manuale di configurazione (24 pagine), Manuale di configurazione (24 pagine)

Configuring the IPv4 Address Settings Using the Smart Organizing

Monitor

On the [Start] menu, click [All Programs].

Click [Smart Organizing Monitor for SP xxx Series].

Click [Smart Organizing Monitor Status].

Click the [User Tools] tab.

Click [IP Address].

Enter the MAC address.

For the MAC address you need to enter, check the items on the configuration page. Depending on your

connection method, the item you need to check on the configuration page varies.

For Ethernet connection

Interface Information

For wireless connection

Wireless Status

Enter the IP address you want to change.

The computer's IP address can be ascertained using Command Prompt. To display the IP address, open

Command Prompt, enter "ipconfig", and then press the [Enter] key.

Enter the IP address of the computer being used with the variable part in the IP address modified.

Specify the subnet mask and default gateway address as required in accordance with the network environ‑

ment.

Click [OK].

If the configuration is successful, the message "IP Address has been set well." appears.

If the configuration fails, the message "Setting IP Address failed. Try again." appears. If this happens,

repeat the procedure from Step 6.

Click [OK].

Click [Close].