Ricoh Aficio AP4510 Manuale supplementare - Pagina 7

Sfoglia online o scarica il pdf Manuale supplementare per Stampante Ricoh Aficio AP4510. Ricoh Aficio AP4510 38. Sap printing
Anche per Ricoh Aficio AP4510: Manuale di istruzioni per l'uso (32 pagine), Manuale di sostituzione (2 pagine), Procedure di installazione (2 pagine), Manuale di installazione (4 pagine), Manuale (12 pagine), Manuale di installazione rapida (2 pagine)

Note

❒ When you use NIS, the IP address and host name are written to /etc/hosts

on the master server. When you use DNS, the information is written to a

data file on the name server. After writing the host name and IP address to

the file, make sure that the configuration is correct by pinging the host

name.

# ping host_name

❒ If the host name is registered with an IP address, the server can access the

printer using its host name instead of its IP address.

Executing the Installation Shell Script

After having configured the printer IP address, follow the procedure below to

execute the installation shell script and set up the workstation printing environ-

ment.

Preparation

Before executing the installation shell script, the IP address, the host name

and the printer name are required.

Following procedures use sample IP address: 192.168.15.16, sample host

name: nphost and sample printer name: np.

Note

❒ Use ftp to get the installation shell script from the printer.

A A A A

Log on to the workstation as root.

Note

❒ If you do not log on as root, the installation shell script will not run.

B B B B

Get the installation shell script from the printer.

A A A A Move to the directory you want to copy the installation shell script to.

B B B B Use ftp to connect to the printer with the IP address that you just config-

ured.

# ftp 192.168.15.16

Connected to 192.168.15.16

220 printer FTP server ready.

name (192.168.15.16:root:)

C C C C When a user name is requested, leave blank and press the { { { { RETURN} } } } key.

331 Password required for root.

Password:

D D D D When a password is requested, leave blank and press the { { { { RETURN} } } } key.

230 User root logged in.

ftp>

Using the Installation Shell Script