Cisco Unified 6921 Manuale di configurazione - Pagina 14

Lower Viewing Angle

Mounting the Phone to the Wall

You can mount the Cisco Unified IP Phone on the wall by using special brackets available in a

Cisco Unified IP Phone wall mount kit. For information on installing the wall mount kit, see

Appendix E, "Installing the Wall Mount Kit for the Cisco Unified IP Phone 6921, 6941, 6945, and 6961"

Appendix F, "Cisco Unified IP Phone Non-Lockable Wall Mount."

Wall mount kits are ordered separately from the phone.

Note

After the Cisco Unified IP Phone has power connected to it, the phone begins its startup diagnostic

process by cycling through the following steps.

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

3-14

The following LED buttons flash on and off during the various stages of boot up as the phone checks

its hardware. See

Table 3-2

for a list of the hardware test and the LED diagnostic status.

Chapter

OL-24567-01