Ricoh SP 150SUw Manuale di connessione Wi-Fi - Pagina 12
Sfoglia online o scarica il pdf Manuale di connessione Wi-Fi per Stampante Ricoh SP 150SUw. Ricoh SP 150SUw 16.
Anche per Ricoh SP 150SUw: Manuale di configurazione (2 pagine)
Stampa la pagina
4. Press and hold the
longer.
The power indicator flashes twice and the Soft AP function is
enabled on the printer.
5. Set papers on the printer.
6. Press the
power key three times successively.
The System Settings are printed out from the printer.
7. Confirm that the Soft AP function is enabled on the
System Settings sheet.
• [Enable] or [Disable] is displayed for [Soft AP] under the
[Wireless Network] category.
If the Soft AP is not enabled, perform the procedure from 1
again to enable the function.
8. Enable the Wi-Fi function on the smart device.
Available access points are searched for, and found access
points are displayed in the list.
9. Tap the printer in the list.
10. Enter the password for Soft AP, and click [Join].
• You can find the password for Soft AP in [Passphrase] under
[Soft AP] on the System Settings sheet.
• The SSID and password for Soft AP can be changed using
"RICOH Printer".
For details, see page 10 "Enabling the Soft AP function using
"RICOH Printer"".
• To disable the Soft AP function, press and hold the
key for 1 second or longer. The power indicator flashes three
times, and the function is disabled.
If the connection is established, you can use the printer via Wi-Fi
network.
Enabling the Soft AP function using
"RICOH Printer"
1. Connect the smart device with the printer via a Wi-
Fi router.
• For the Wi-Fi router connection, see page 5 "Installing the
Printer Driver and "RICOH Printer" software".
2. Tap the
icon on the smart device.
The application is launched, and available RICOH printers are
automatically searched for.
• An error message appears when Wi-Fi connection failed or
RICOH printers are not found.
Printers are searched for again if clicking [OK].
Click [Cancel] to cancel the search and set up the Soft AP
settings.
3. Tap [Settings].
power key for 1 second or
4. Tap [Soft AP].
• The SSID and password for the printer are set by default.
You can change the SSID and password for Soft AP. Tap the
setting of [SSID], and enter an SSID in 1 to 32 characters
(specify with US ASCII characters). Tap the setting of [Pass-
word], and enter a password in 8 to 63 characters.
5. Toggle the [Soft AP] switch to enable the Soft AP
function.
6. Tap [Done].
• If the setting is modified, the authentication password entry
screen appears after [Done] is tapped.
Enter the administrator password (default password is
"888888". The password can be set from [Modify Password]
in the [Settings] menu.), and tap [OK].
Restart the printer to apply the modified setting to the printer.
7. Enable the Wi-Fi function on the smart device.
Available access points are searched for, and found access
points are displayed in the list.
8. Tap the printer in the list.
power
9. Enter the password for Soft AP, and click [Join].
If the connection is established, you can use the printer via Wi-Fi
network.
10