Ricoh PJ WX3340N Manuale di avvio - Pagina 2
Sfoglia online o scarica il pdf Manuale di avvio per Proiettore Ricoh PJ WX3340N. Ricoh PJ WX3340N 2. Desk edge projection system
Anche per Ricoh PJ WX3340N: Specifiche tecniche (4 pagine), Note per gli utenti (2 pagine)
Stampa la pagina
The procedures explained in this manual are for how to use the projector
with a remote control.
CUD069
Turn on the equipment that is
Projecting an Image
connected to the projector.
The input signal is detected automatically
and the image is projected. To project the
Insert the connector of the
image of a video player, press the play
button on the video player. To project a
power cord set into the AC In
laptop computer's screen, switch the
socket on the projector.
computer's image output. If the projected
image is not the one that you wanted to
project, press the [Input] button to switch
the input signal.
•
To change the display language, press the
[Menu] button, and then select the display
language in [Language / XXX] (XXX indi-
cates the current display language) on the
[
•
When connecting a laptop computer to the
CUD018
projector, switch the computer's image output.
Insert the power plug into a
In Windows operating systems, the image
power outlet.
output can be switched with a function key.
While pressing and holding the [Fn] key, press
The projector turns on in this step if
the
[Power On Method] in [Default Settings
function key.
2] on the menu screen is set to [Auto.].
Proceed to step 4.
Computer brand
Press the
(Power) button.
MSI
Select the display language on the start
Everex, Mitsubishi,
menu the first time you turn on the
NEC, Panasonic, Sotec
projector after you purchase it.
Gateway, HP
•
RICOH PJ X3340N/WX3340N/
X4240N/WX4240N
acer, Sharp, Sotec,
The [Network Setting Wizard] screen
TOSHIBA
appears after selecting the display
Hitachi, IBM, lenovo,
language. To configure the network
SONY
settings, see "Connecting the Projector
to a Network", Operating Instructions
Asus, DELL, Epson,
.
Hitachi
FUJITSU
Adjusting the Projected
Image
Adjusting the Angle of the Projection
❖
Reducing the Size of the Projected
❖
Image
The image can be reduced by 80 to 100%
using the digital zoom function.
Press the
Adjust the size of the projected
image.
] tab.
Enlarging the Size of the Projected
❖
Image
key, the
key, or the LCD/VGA
The image can be enlarged by 100 to 150%
using the optical zoom function.
Key
combination
Move the zoom lever to adjust
the size of the projected image.
[Fn] + [F2]
[Fn] + [F3]
[Fn] + [F4]
[Fn] + [F5]
[Fn] + [F7]
[Fn] + [F8]
[Fn] + [F10]
•
The RICOH PJ X4240N/WX4240N do not
support the optical zoom function.
Adjusting the Focus
❖
•
RICOH PJ X3340/WX3340
1
2
•
RICOH PJ X3340N/WX3340N
CUD045
The focus is automatically adjusted by
the automatic focus function. To adjust
the focus manually, press the [Focus]
button, and then press the
button.
•
RICOH PJ X4240N/WX4240N
(Zoom) button.
CUD046
Adjusting for Keystone Distortion
❖
Press the
(Keystone)
button.
Adjust the keystone distortion.
CUD040
Adjustments while
Projecting Images
Adjusting the Volume of the Speaker
❖
Press the
(Volume)
button.
Adjust the volume.
CUD047
Enlarging the Image
❖
Press the
(Magnify)
button.
CUD041
Adjust the magnification
ratio.
OPQRSTU
ABCDEFGHIJKL
or
MNOPQRSTUV
YZabcdefg
WXYZabcdefghijk
lmnopqrstuvwxyz
opqrstuvw
123456789
CUD010
Press the [Enter] button.
Move the display position of
the enlarged image.
ABCDEFGHIJKL
MNOPQRSTUV
WXYZabcdefghijk
YZabcdefg
lmnopqrstuvwxyz
opqrstuvw
123456789 10 11
3456789 10
12 13 14 15 16 17 18
CUD012
To change the magnification ratio,
press the [Enter] button, and then repeat
CUD042
step 2.
To cancel this function, press
the [Magnify] button again.
CUD004
Temporarily Blanking the Image and
❖
Muting the Audio
Press the
(AV Mute)
button.
The image blanks and the audio
mutes.
To cancel this function, press
the [AV Mute] button again.
Freezing the Image
❖
Press the
(Freeze) button.
The image freezes.
To unfreeze the image, press
the [Freeze] button again.
Turning Off the Projector
Press the
(Power) button.
The confirm screen appears.
Press the [Power] button again.
The projector beeps and the projector
turns off.
© 2012
Printed in China
EN GB
EN US
EN AU
Y028-7501A
Start Guide