Ricoh Aficio SP 4110N-KP Manuale di configurazione rapida - Pagina 8

Sfoglia online o scarica il pdf Manuale di configurazione rapida per Scanner Ricoh Aficio SP 4110N-KP. Ricoh Aficio SP 4110N-KP 11. Quick setup guide

Stampa la pagina
HotSpot Printer Quick Setup Guide
No.
Issue
3
Service
status reads:
[PrinterOn x.x
InternetDown]
Cont.
Service status
reads: [Printer
On x.xInternet
Down]
To correct the problem, proceed as follows:
Step
1: From the printer's control panel, assign IP Address, Subnet Mask,
Gateway Address values. Note: Reboot the printer by turning the power
off for at least five seconds.
Reference: For more information, refer to the printer' s Hardware Guide >
Configuration, located on the printer Manual included with the printer.
Step
2: From Web Image Monitor, change the DNS Server values to match
those entered via the printer's control panel. Important: Assign both
primary and back-up DNS Addresses.
a.
Make sure you have Internet access on an unrestricted network line.
b.
Open your Web browser
c.
Go to: http://PrinterIPAddress.
d.
Enter login credentials. Defaults:
•
Login User Name: admin
•
Password: leave blank
e.
Click [Login].
f.
Click [Configuration] link, left sidebar.
g.
Under Network, click [IPv4].
h.
Under Details, click [Specify] button
adjacent to [Auto Obtain (DHCP)].
Important: If the DNS server is set
to [Specify], enter the values for the
Primary (DNS Server1) and
Secondary (DNS Server2) servers.
i.
Click [OK] to save changes.
Step
3: Reboot the printer. This step is critical, as the changes will not take
effect until after the device is reset.
a.
Turn printer OFF.
b.
Turn printer ON. Approx. 90 seconds after [Ready] appears in the display,
the message [For Print Release, Press OK] appears. You're ready to print.
Action