Ricoh G829 Manuale di servizio - Pagina 15

Sfoglia online o scarica il pdf Manuale di servizio per Scanner Ricoh G829. Ricoh G829 17.

14 June, 2005

3.2.2 FIRMWARE UPDATE

This machine has one firmware type:

• Network firmware

NOTE: 1) You can keep both firmware programs on the same SD card.

2) Do not put firmware programs from another machine on the SD card

you will use for this machine. You cannot mix multiple machine firmware

programs on the same SD card.

3) You do not need to create a root directory when you update the

firmware for this machine.

Before you do this procedure, prepare an SD card that contains the required

firmware.

1. Turn off the main power of the machine.

2. Do the "Backup SD card" procedure. (

3. Install the SD card, which contains the required firmware, into the SD card slot

[A].

4. Turn on the main power of the mainframe while holding down the ,  and

 keys together.

5. When "START" is displayed, press the Start button.

6. Follow the procedure displayed on the operation panel to update the network

firmware.

NOTE: "Upgrading complete" is displayed after completing this update

correctly.

7. Turn off the main power, and then remove the SD card.

8. Do the "Restore SD card" procedure. (

1. Turn off the main power.

2. Install an SD card, which does not have any data, into the SD card slot [A].

3. Turn on the main power.

4. Enter the SP mode (

5. Press  three times consecutively to download the setting data from the

mainframe to the SD card.

6. After completing the setting data backup, turn off the main power, and then

remove the SD card from the SD card slot.

3.2.3 Backup SD card procedure)

3.2.3 Restore SD card procedure)

3.2.1), and then select SP1-017 (Backup SD Card).

SERVICE TABLES