Cisco 1401 Manuale di avvio rapido - Pagina 7

Sfoglia online o scarica il pdf Manuale di avvio rapido per Router di rete Cisco 1401. Cisco 1401 8.

Stampa la pagina

Verify Your Installation

3
After the router is powered on, the following LEDs confirm that you have correctly installed
your router.
LED
Location
PWR
Front
OK
Front
LNK
Rear
WAN CARRIER
Front
ETHERNET ACT
Front
OK
Rear

For More Information

For more information about installing or configuring your Cisco 1401 router, refer to the
following sources:
Cisco 1401 Router Installation and Configuration Guide (in the accessory kit).
•
•
The Cisco Connection Online card (in the accessory kit), which lists telephone numbers,
e-mail addresses, and World Wide Web URLs for getting information directly from Cisco
Systems.
What to Look for
On when power is being supplied to the router.
• One blink per second when the router is in ROM monitor
mode.
• Several blinks per second when the router is running the boot
image in ROM monitor.
• On steady when the Cisco IOS software is loaded and
functional.
On when the router is correctly connected to the local Ethernet
network through the ETHERNET port.
On when the router has synchronized with the ADSL switch.
Blinking when there is network traffic on the local Ethernet LAN.
On when the Flash PC card is correctly installed in the router. If
this LED is off, refer to the installation and configuration guide
that came with your router for instructions on how to reinstall the
Flash PC card.
7