Cisco 1941 Installazione e aggiornamento - Pagina 4

Sfoglia online o scarica il pdf Installazione e aggiornamento per Router di rete Cisco 1941. Cisco 1941 24. 1900 series

Stampa la pagina
Modules Internal to the Cisco 1905 and 1921 Routers
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
Before opening the unit, disconnect the telephone-network cables to avoid contact with
Warning
telephone-network voltages. Statement 1041
This equipment contains a ring signal generator (ringer), which is a source of hazardous voltage. Do
Warning
not touch the RJ-11 (phone) port wires (conductors), the conductors of a cable connected to the RJ-11
port, or the associated circuit-board when the ringer is active. The ringer is activated by an incoming
call. Statement 1042
Warning
The covers are an integral part of the safety design of the product. Do not operate the unit without the
covers installed. Statement 1077
Warning
For connections outside the building where the equipment is installed, the following ports must be
connected through an approved network termination unit with integral circuit protection.
T1 SFP Statement 1044
Safety Warnings for Finland, Norway and Sweden
Warning statement 1017 applies to the countries of Finland, Norway, and Sweden.
This unit is intended for installation in restricted access areas. A restricted access area can be
Warning
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Modules Internal to the Cisco 1905 and 1921 Routers
No user-serviceable parts inside. Do not open. Statement 1073
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
There are no user-serviceable or field replaceable parts in the 1905 and 1921 model routers. For service
and support issues see
Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series ISRs
4
Installing and Upgrading Internal Modules and FRUs in Cisco 1900 Series ISRs
"Obtaining Documentation and Submitting a Service
Request".