Epson EMP-715 - XGA LCD Projector Informazioni sul prodotto - Pagina 5

Sfoglia online o scarica il pdf Informazioni sul prodotto per Proiettore Epson EMP-715 - XGA LCD Projector. Epson EMP-715 - XGA LCD Projector 13. Epson powerlite 505c: product information
Anche per Epson EMP-715 - XGA LCD Projector: Specifiche tecniche (3 pagine)

Stampa la pagina

If you're using a PowerBook:

You may need to set up your system to display on the

projector screen as well as the LCD screen. Follow these steps:

1. From the Apple

menu, select

Monitors and Sound

Arrange

2. Click the

icon.

3. Drag one monitor icon on top of the other.

If this option isn't available, you may need to select one of the

Simulscan resolution settings:

Monitor

1. Click the

icon.

Simulscan

2. Select a

resolution. (Allow a few seconds for the

projector to sync up after making the selection.)

If you're using a PC laptop:

❏ Hold down the

key and press the function key that lets

you display on an external monitor. It may have an icon such

or it may be labelled

seconds for the projector to sync up after pressing it. Check

your laptop's manual or online help for details.

On most systems, the

LCD screen and the projector, or display on both at the

same time.

❏ Depending on your computer's video card, you might need

to use the Display utility in the Control Panel to make sure

that both the LCD screen and external monitor port are

enabled. See your computer's documentation or online help

for details.

Focusing and Zooming Your Image

Rotate the focus ring to sharpen the image.

Use the tab to rotate the lens ring and reduce or enlarge the

image.

You can also change the image size by moving the projector

closer to or farther away from the screen. You can use the

E-Zoom

button on the remote control to zoom in on a portion

of the image. See the

User's Guide

Control Panels,

then click

CRT/LCD.

Allow a few

key lets you toggle between the

lens ring

tab

focus ring

for instructions.

EPSON PowerLite 505c/715c Projector

Adjusting the Height of Your Image

If the image is too low, you can raise it by extending the

projector's feet.

1. Stand behind the projector. Pull up the blue foot release

levers and lift the front of the projector. This unlocks the

feet.

Caution: Do not hold the projector by the lens; this can

damage it.

2. Once the image is positioned where you want it, release the

levers to lock the feet in position.

3. To fine-tune the height of the image, rotate the thumb

wheels attached to the projector's feet.

If the image is no longer square after raising it, see the next

section.

Adjusting the Image Shape

If the projected image isn't square or has a "keystone" shape,

try the following:

❏ If your image looks like

projector off to one side of the screen, at an angle. Move it

directly in front of the center of the screen, facing the screen

squarely.

❏ If your image looks like

Keystone

side of the

image. After correction, your image will be slightly smaller.

1/01

EPSON PowerLite 505c/715c Projector

, you've placed the

, press the + or —

button to correct the shape of the

Keystone button

- 5