Cisco 2800 Series Configurazione - Pagina 21

Sfoglia online o scarica il pdf Configurazione per Router di rete Cisco 2800 Series. Cisco 2800 Series 32. Cisco ios software configuration
Anche per Cisco 2800 Series: Manuale di avvio rapido (13 pagine), Scheda tecnica (8 pagine), Manuale di avvio rapido (47 pagine), Nota applicativa (41 pagine), Manuale di avvio rapido (45 pagine), Configurazione (10 pagine), Panoramica (27 pagine), Scheda tecnica (5 pagine), Scheda tecnica (20 pagine)

Configuring Radio Settings on an Access Point

Configuring Beacon Period and DTIM on an Access Point

Perform this task to configure the beacon period and delivery traffic indication message (DTIM).

The beacon period is the amount of time between AP beacons in Kilo microseconds. One

kilomicrosecond equals 1,024 microseconds. The Data Beacon Rate, always a multiple of the beacon

period, determines how often the beacon contains a DTIM. The DTIM tells power-save client devices

that a packet is waiting for them.

For example, if the beacon period is set at 100, its default setting, and the data beacon rate is set at 2, its

default setting, then the AP sends a beacon containing a DTIM every 200 kilomicroseconds.

The default beacon period is 100, and the default DTIM is 2.

SUMMARY STEPS

enable

configure terminal

interface dot11Radio interface

beacon {period microseconds | dtim-period period-count}

end

copy running-config startup-config

How to Configure Radio Settings on an Access Point