C3 Custom Coolers ROVER Manuale d'uso - Pagina 8
Sfoglia online o scarica il pdf Manuale d'uso per Congelatore C3 Custom Coolers ROVER. C3 Custom Coolers ROVER 16. Remote control cooler
Anche per C3 Custom Coolers ROVER: Manuali di avvio rapido (2 pagine)

Assembly
Attaching Wheels
Tools required: Phillips head screwdriver, wrench or needle nose pliers
Assembly time: 10 minutes
Step 1
Place cooler body upside down
on a non-abrasive, clean surface.
Remove rubber band from
rear gear box assembly.
Holding gear boxes firmly in
place, slide rear axle through
gear boxes.
Step 2
Place a wheel on left rear axle,
then a washer.
Make sure the flat side of the
wheel faces out as shown and
inner wheel fits into gear box.
Insert (1) cotter pin through the
axle to secure wheels.
Using needle nose pliers, bend
back longer end of cotter pin to
secure.
Repeat for right rear axle.
Step 3
Line up notches on hubcaps with
notches on wheels.
Gently press hubcaps to snap
into place.
Step 4
Insert front axle assembly as shown.
Insert (1) cotter pin in both bottom
ends of front axle assembly.
Using needle nose pliers, bend back
longer end of cotter pin to secure.
8
remove rubber
band
insert pin &
bend back