Cisco RV160 Manuale di avvio rapido - Pagina 8
Sfoglia online o scarica il pdf Manuale di avvio rapido per Router di rete Cisco RV160. Cisco RV160 11.
Stampa la pagina
Enter the Username.
S
3
TEP
Enter the old Password.
S
4
TEP
Enter the new Password.
S
5
TEP
Confirm the new Password.
S
6
TEP
Select the group (admin, guest) from the drop-down list in the
S
7
TEP
Password Strength Meter.
Click Save.
S
8
TEP
Troubleshoot Your Connection
If you cannot access your device by using the Setup Wizard, the device
may not be reachable from your computer. You can test network
connections by using ping on a computer running Windows:
Open a command window by using Start > Run and enter cmd.
S
1
TEP
At the Command window prompt, enter ping and the device IP
S
2
TEP
address. For example, ping 192.168.1.1 (the default static IP
address of the device).
If you can reach the device, you should get a reply similar to the
following:
Pinging 192.168.1.1 with 32 bytes of data:
Reply from 192.168.1.1: bytes=32 time<1ms TTL=128
If you cannot reach the device, you should get a reply similar to the
following:
Pinging 192.168.1.1 with 32 bytes of data:
Request timed out.
Possible Causes and Resolutions
Bad Ethernet connection:
Check the LEDs for the proper indications. Check the connectors of the
Ethernet cable to ensure that they are firmly plugged into the device
and your computer.
Wrong or conflicting IP address:
Verify that you are using the correct IP address of the device.
Verify that no other device is using the same IP address as this device.
No IP route:
8
Cisco RV160 Router Quick Start Guide