Cisco RV340 Series Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Router di rete Cisco RV340 Series. Cisco RV340 Series 13. Security router
Anche per Cisco RV340 Series: Manuale di configurazione facile (12 pagine), Manuale di avvio rapido (10 pagine)

Stampa la pagina

Cisco RV340 Series Manuale di avvio rapido

Welcome

Thank you for choosing the Cisco RV340 Router.

This guide describes how to install your Cisco RV340 and launch the web-

based Device Manager.

Installing the Cisco RV340

To prevent the device from overheating or being damaged:

• Ambient Temperature—Do not operate it in an area that exceeds an

ambient temperature of 104°F (40°C).

• Airflow—Be sure that there is adequate airflow around the device. If

wall mounting the firewall, make sure that the heat dissipation holes are

to the side.

• Circuit Overloading—Adding the device to the power outlet must not

overload that circuit.

• Mechanical Loading—Be sure that the device is level and stable to

avoid any hazardous conditions and that it is secure to prevent it from

sliding or shifting out of position. Do not place anything on top of the

firewall, as excessive weight may damage it.

Desktop Mounting

For desktop mounting, place the device on a flat surface so that it sits on its

four rubber feet.

Wall Mounting

For wall mounting, the router has two wall-mount slots on the bottom panel.

To mount the router on a wall, you need mounting hardware (not included).

Drill two pilot holes, approximately 109 mm apart, into the surface.

TEP

Insert a screw into each hole, leaving a gap between the surface

TEP

and the base of the screw head of 1 mm to 1.2 mm.

Place the router wall-mount slots over the screws and slide the

TEP

router down until the screws fit snugly into the wall-mount slots.

Cisco RV340 Router Quick Start Guide