Cisco SGE2000 Scheda tecnica - Pagina 2
Sfoglia online o scarica il pdf Scheda tecnica per Router di rete Cisco SGE2000. Cisco SGE2000 5. Nx-os fabric extender
Anche per Cisco SGE2000: Manuale di installazione rapida (32 pagine), Nota di rilascio (16 pagine), Manuale di aggiornamento del firmware (5 pagine), Manuale di avvio rapido (2 pagine), Manuale di configurazione (46 pagine)
Stampa la pagina
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Simplified QoS management using 802.1p, differentiated services (DiffServ), or (ToS) traffic
●
prioritization specifications
Power redundancy when used with Cisco RPS1000 380W Redundant Power Supply Unit
●
Fully resilient stacking for optimized growth with simplified management
●
ACLs for granular security and QoS implementation
●
Can be configured and monitored from a standard web browser
●
Secure remote management of the switch via Secure Shell (SSH) and SSL encryption
●
802.1Q-based VLANs enable segmentation of networks for improved performance and
●
security
Private VLAN Edge (PVE) for simplified network isolation of guest connections or
●
autonomous networks
Automatic configuration of VLANs across multiple switches through Generic VLAN
●
Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)
User/network port-level security via 802.1X authentication and MAC-based filtering
●
Increased bandwidth and added link redundancy with link aggregation
●
Enhanced rate-limiting capabilities, including back pressure, multicast, and broadcast flood
●
control
Port mirroring for noninvasive monitoring of switch traffic
●
Jumbo frame support up to 10KB
●
Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote
●
Monitoring (RMON) support
Fully rack mountable using the included rack-mounting hardware
●
Simple, one-step automated installation and initial configuration
●
Specifications
Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
SGE2000 24-Port Gigabit Switch.
Table 1.
Specifications for the Cisco SGE2000 24-Port Gigabit Switch
Specifications
Ports
Buttons
Cabling type
LEDs
Performance
Switching capacity
Forwarding rate
(based on 64-byte packets)
Stacking
● 24 RJ-45 connectors for 10BASE-T/100BASE-TX/1000BASE-T with 4 shared Gigabit
SFP slots
● Console port
● Auto medium dependent interface (MDI) and MDI crossover (MDI-X)
● Auto negotiate/manual setting
● RPS port for connecting to redundant power supply unit
Reset button
● Unshielded twisted pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX
● UTP Category 5 Ethernet or better for 1000BASE-T
PWR, Fan, Link/Act, Speed, RPS, Master, Stack ID 1 through 8
Up to 48 Gbps, nonblocking
Up to 35.7 mpps
Data Sheet
Page 2 of 5