Cisco SLM2024T-NA Manuale di configurazione - Pagina 29
Sfoglia online o scarica il pdf Manuale di configurazione per Router di rete Cisco SLM2024T-NA. Cisco SLM2024T-NA 46. Nx-os fabric extender
Anche per Cisco SLM2024T-NA: Scheda tecnica (11 pagine)
Stampa la pagina
Configuring the Fabric Extender
Disassociating a Fabric Extender From an Interface
Before You Begin
Ensure that you have installed and enabled the Fabric Extender feature set.
Ensure that you are in the correct VDC (or use the switchto vdc command).
SUMMARY STEPS
1. configure terminal
2. interface {ethernet slot/port | port-channel channel}
3. no fex associate
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2
interface {ethernet slot/port | port-channel channel}
Example:
switch(config)# interface port-channel 4
switch(config-if)#
Step 3
no fex associate
Example:
switch(config-if)# no fex associate
Associating a Fabric Extender to an F2 Module
You can associate the Fabric Extender to an F2 module.
Before You Begin
Ensure that you have installed and enabled the Fabric Extender feature set.
• switch# configure terminal
• switch(config)# install feature-set fex
• switch(config)# feature-set fex
OL-25816-02
Purpose
Enters configuration mode.
Specifies the interface to configure. The interface can
be an Ethernet interface or a port channel.
Disassociates the Fabric Extender unit attached to the
interface.
Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide
Associating a Fabric Extender to a Fabric Interface
19