CABAC HNKE8 Manuale operativo - Pagina 2

Sfoglia online o scarica il pdf Manuale operativo per Utensile elettrico CABAC HNKE8. CABAC HNKE8 3. Bootlace crimper 25-185mm2

OPERATING INSTRUCTIONS – HNKE8

Customer Care Australia P: 133 122 F: 1300 303 310 E: [email protected] W: cabac.com.au

A: 8 Distribution Pl, Seven Hills NSW 2147

Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: [email protected] W: cabac.co.nz

Assemble the handles and crimp body of the HNKE8.

Use the screws to secure the handles.

Select the correct die size for the bootlace ferrule to

be crimped. Undo the screw on the lower piston with

an Allen key and insert the die with the indent ridge.

Then secure by tightening the screw.

Secure the nest die in position as shown in the picture

and fasten in place with an Allen key.

Strip the cable insulation to the required length of the

bootlace terminal. Insert the bare conductor into the terminal.