Epson V11H128020 - PowerLite S1 SVGA LCD Projector Manuale informativo sul prodotto - Pagina 12
Sfoglia online o scarica il pdf Manuale informativo sul prodotto per Proiettore Epson V11H128020 - PowerLite S1 SVGA LCD Projector. Epson V11H128020 - PowerLite S1 SVGA LCD Projector 15. Epson powerlite elpmbuni: installation guide
Anche per Epson V11H128020 - PowerLite S1 SVGA LCD Projector: Specifiche tecniche (2 pagine), Manuale di configurazione rapida (7 pagine), Manuale di installazione (19 pagine)
Stampa la pagina
Compatible computers
Windows
: Windows 98/2000/Me/XP
Macintosh
: Mac OS
9.1 or later/OS X 10.1 or later
Note: The presentation remote receiver can only be connected to
computers with a standard USB interface.
Some computer settings may have to be changed for the mouse
function to be used. See your computer's documentation for details.
Replacing Remote Control Batteries
When the battery in the remote control or presentation remote
control runs out, follow the steps below to replace it. Each
remote requires one CR2025 lithium battery.
1. Remove the battery holder.
Press here and slide
out battery holder
2. Remove the old battery and insert the new one. Make sure
+
the
side of the battery is facing up, as shown.
Old battery
3. Slide the battery holder back
into the remote control until
it clicks into place.
Caution:
When replacing the battery, take the following precautions:
❑ Replace the battery as soon as it runs out.
❑ If the battery leaks, wipe away battery fluid with a soft cloth. If
fluid gets on your hands, wash them immediately.
❑ Remove the battery if you will not be using the remote for a
long period of time.
❑ Dispose of the used battery in accordance with your local
regulations.
New battery
+
Mark
EPSON PowerLite S1 Projector
Cleaning the Lens
Clean the lens whenever you notice dirt or dust on the surface.
❏ To remove dust, use a canister of compressed air to spray the
lens surface, or lightly wipe the lens surface with a soft, dry,
lint-free cloth.
❏ To remove dirt or smears, use lens-cleaning paper. If
necessary, moisten a soft cloth with an alcohol-based cleaner
and gently wipe the lens surface.
Caution:
Do not rub the lens with harsh material or subject it to shocks, as it
can be easily damaged.
Cleaning the Projector Case
Before you clean the projector case, turn off the projector and
unplug the power cord.
❏ To remove dirt or dust, wipe the outside with a soft, dry,
lint-free cloth.
❏ To remove stubborn dirt or stains, clean the case using a soft
cloth moistened with water and a neutral detergent. Dry it
using a separate cloth.
Caution:
Do not use alcohol, benzene, thinner, wax, or other chemicals.
These can damage the case.
Cleaning the Air Filter
If the air filter becomes clogged with dust, it can cause
overheating and damage the projector. Follow these steps to
clean the filter:
1. Turn off the projector, let it cool down, and unplug the
power cord.
5/03
EPSON PowerLite S1 Projector - 11