Epson V11H128020 - PowerLite S1 SVGA LCD Projector Manuale informativo sul prodotto - Pagina 5
Sfoglia online o scarica il pdf Manuale informativo sul prodotto per Proiettore Epson V11H128020 - PowerLite S1 SVGA LCD Projector. Epson V11H128020 - PowerLite S1 SVGA LCD Projector 15. Epson powerlite elpmbuni: installation guide
Anche per Epson V11H128020 - PowerLite S1 SVGA LCD Projector: Specifiche tecniche (2 pagine), Manuale di configurazione rapida (7 pagine), Manuale di installazione (19 pagine)
Stampa la pagina
EPSON PowerLite S1 Projector
Turning the Projector On and Off
Once you've connected the projector to your computer or other
equipment follow these instructions to turn it on and display an
image:
1. Make sure the power is turned off for the projector and any
sources connected to it.
2. Remove the lens cover.
3. Connect the power cord to the projector and plug the other
end into a grounded electrical outlet.
Power
The P
light on the projector turns orange, indicating
that the projector is receiving power, but is not yet turned
on.
Orange
Note: The projector will not respond to any buttons on the
control panel or remote control while the power light is
flashing orange.
4. If you are connecting to a device other than a computer, turn
on your equipment. (If you are connecting to a computer,
don't turn it on yet.)
4 - EPSON PowerLite S1 Projector
Power
5. Press the P
of the projector to turn on the projector.
Power button
You hear a beep, the P
projector warms up, and the projection lamp comes on in
about 6 seconds.
Note: You may see a blue screen with the
displayed. This is normal.
6. If you are using a computer, turn it on now.
7. Start your video or presentation. If you have connected more
than one video or computer source, you may need to press
Computer
S-Video/Video
the
or
Source
control or the
one you want to watch. (See "Switching Between Picture
Sources" on page 6 for more information.)
If the image is upside-down or reversed, you need to turn on
Rear
Ceiling
the
,
, or
menu.
If a projected image fails to appear, see the following section,
"Troubleshooting."
Once you see your image, see page 6 for instructions on
focusing and making other image adjustments.
Turning Off the Projector
When you're ready to shut down the projector, follow these
steps:
1. Turn off any video or computer sources connected to the
projector first.
Power
2. Press the P
control to turn off the projector.
You see a confirmation message:
If you don't want to turn it off,
press any button or ignore the
message. (It disappears in about 7
seconds.)
5/03
button on the remote control or the top
Power
light flashes green as the
No Signal
button on the remote
button on the projector to select the
Rear/Ceiling
option in the Setting
button on the projector or remote
message