Cisco 1700 series Manuale di installazione dell'hardware - Pagina 15

Sfoglia online o scarica il pdf Manuale di installazione dell'hardware per Punto di accesso wireless Cisco 1700 series. Cisco 1700 series 46. Secure firewall management center
Anche per Cisco 1700 series: Manuale di informazioni sulla conformità normativa e sulla sicurezza (45 pagine), Manuale (15 pagine), Manuale di configurazione (25 pagine), Nota applicativa (41 pagine), Risoluzione dei problemi hardware (12 pagine), Panoramica del manuale (13 pagine), Configurazione (34 pagine), Manuale (5 pagine), Manuale di avvio rapido (6 pagine)

Stampa la pagina

Cisco 1700 series Manuale di installazione dell'hardware

Overview

System status LED:

Fan status LED:

Temperature status LED:

• Green—The chassis is running in normal

operating condition.

• Green, flashing—The chassis is performing

system initialization and memory check.

• Amber—The chassis is in a degraded

operational state (minor fault).

• Power supply redundancy is lost.

• CPUs are mismatched.

• At least one CPU is faulty.

• At least one DIMM is faulty.

• At least one drive in a RAID

configuration failed.

• Amber, two flashes—There is a major fault

with the system board.

• Amber, three flashes—There is a major fault

with the DIMMs.

• Amber, four flashes—There is a major fault

with the CPUs.

• Green—All fans are operating properly.

• Amber, flashing—One or more fans

breached the unrecoverable threshold.

• Green—The chassis is operating at normal

temperature.

• Amber—One or more temperature sensors

breached the critical threshold.

• Amber, flashing—One or more temperature

sensors breached the unrecoverable

threshold.

Cisco Secure Firewall Management Center 1700, 2700, and 4700 Hardware Installation Guide

Power supply status LED:

• Green—All power supplies are operating

normally.

• Amber—One or more power supplies are in

a degraded operational state.

• Amber, flashing—One or more power

supplies are in a critical fault state.

Network link activity LED:

• Off—The Ethernet port link is idle.

• Green—One or more Ethernet ports are

link-active, but there is no activity.

• Green, flashing—One or more Ethernet ports

are link-active with activity.

—

Front Panel LEDs