CABASSE ZEF13TR Manuale d'uso - Pagina 6

Sfoglia online o scarica il pdf Manuale d'uso per Altoparlanti CABASSE ZEF13TR. CABASSE ZEF13TR 9.

Stampa la pagina

ZEF 13 - ZEF 13 TR - ZEF 17 - ZEF 17 TR

UNPACKING

After opening the top carton flaps, fold the carton flaps right

back, remove the cardboard sheet, the foam halfshells pro-

tecting the speakers. Then pull out the speakers and the ac-

cessories. We suggest you to retain the packing for future use.

WALL MOUNT WITH THE STANDARD

YOKE BRACKET

1) Prepare all the necessary parts and tools : the yoke bracket,

and the screws, plugs and drilling equipment suitable for the

type of wall and a spirit level.

Be assured that the wall can handle the weight of the louds-

peaker and that the selected plugs do suit with the wall cha-

racteristics.

2) Position the bracket on the wall at the chosen spot, check

the up and down orientation, check it is with the spirit level

aligned and drill 2 holes through the bracket holes. Insert the

plugs in the wall.

3) Place the damping stickers on the back of the bracket and

mount the bracket with right screws.

4) Fit the loudspeaker into the arms of the bracket, gently

hand tighten both knobs.

5) Connect the loudspeaker cable to the terminals. Ensure

that polarities are correct (see § Phase).

6) Swivel the loudspeaker to the right angle and tight both

nobs.

WALL MOUNT WITH THE OPTIONAL

BALL BRACKET

1) Prepare all the necessary parts and tools: the ball bracket

and screws, plugs and drilling equipment suitable for the type

of wall and a spirit level.

2) Mount the bracket part with two holes on the back of the

loudspeaker, place the other part of the bracket on the wall

and use it as a drilling template, control the alignment and

drill the holes through the bracket. Place the inserts in the

holes.

3) Assemble both bracket parts, swivel the loudspeaker in the

right direction and tighten the bolt.

4) Connect the loudspeaker cable to the terminals. Ensure

that polarities are correct (see § Phase).

OUTDOOR MOUNT

ATTENTION :

Direct long exposure to sunshine or bad

weather can affect the look of you loudspeakers. We recom-

mend the mounting under a canopy for fair weather periods

followed by removal and storage in winter.

When used horizontally outside or in humid environment, be

assured that the loudspeaker is positioned as shown on page

3 with the Cabasse logo on the right hand side.

Optimal positioning for a 2.0 or stereo system

If «d» is the distance between the two speakers, this distance

must be higher than 5 ft (1.5 m) and the two speakers must

be at equal distance from the listening area which forms with

them an equilateral triangle.

The drivers must be directed towards the listening area.

The speakers should be located so that their diffusion fol-

lows the longest dimension of the room.

Generally speaking it is better to avoid putting the speakers

in the corners of a room as this amplifies the low frequencies

and tends to enhance the room resonances.

Placing the speakers in niches is not recommended. Unless

designed for this application, bookshelf placement will alter

the frequency response of the speaker, especially in the low

frequencies. If a bookshelf location cannot be avoid, the

speaker should be set up to minimize various resonance, and

the visible part of the grille must be outside the niche.

WEEE MARK

Disposal of Wastes of Electrical & Electronic

Equipment (Applicable in the European Union)

This symbol on the product, consisting of the

crossed-out wheeled bin, indicates that this

product shall not be treated as household

waste. Instead it shall be handed over to the

applicable collection point for the disposal

of electrical and electronic equipment at the

end of life. By ensuring this product is disposed of correctly,

you will help prevent potential negative consequences for the

environment and human health, which could otherwise be

caused by inappropriate waste handling of this product. The

recycling of materials will help to preserve natural resources.

For more detailed information about recycling of this pro-

duct, please contact your local city office, your household

waste disposal service or the shop where you purchased the

product.