Cisco Aironet 1530 Manuale introduttivo - Pagina 19

Sfoglia online o scarica il pdf Manuale introduttivo per Punto di accesso wireless Cisco Aironet 1530. Cisco Aironet 1530 41. Outdoor access points

Use the mounting bracket as a template to mark four screw hole locations on the mounting

Step 1

surface. See

holes to attach the unit to the wall.

Figure 8

Mounting Bracket for Wall or Pole Mounting

Quick Mount Keyhole Slots (for AP use)

Bracket Mount Holes (use bolts up to 1/4" or

6 mm in diameter)

Use four customer-supplied screws and optional screw-anchors to attach the mounting plate

Step 2

to the mounting surface.

If necessary, use suitable screw anchors and an exterior-grade plywood backboard to mount

Note

the access point to stucco, cement or drywall.

Screw an M6 x12 mm bolt into each of the four support bolt holes on the back of the access

Step 3

point. Do not screw the bolt all the way in; leave approximately a 0.13 inch (3.3 mm) space.

Position the four bolts on the access point into the keyhole slots on the mounting bracket.

Step 4

Figure 8

for the mounting bracket screw hole locations. Use the bracket mount

Mounting Slots (used with the band clamps)