Epson VS335W Manuale operativo - Pagina 23

Sfoglia online o scarica il pdf Manuale operativo per Proiettore Epson VS335W. Epson VS335W 48. Wxga 3lcd projector
Anche per Epson VS335W: Manuale di configurazione rapida (4 pagine), Dichiarazione di conformità (4 pagine), Manuale di riferimento rapido (4 pagine), Opuscolo e specifiche (4 pagine)

Stampa la pagina

Monitoring window layout

The icon patterns and their meanings are explained below.

Group

No warnings or problems

All projectors in the group are normal.

Warning or problem

A projector in the group has a warning or problem status.

Notification

A projector requiring immediate attention has been detected

within the group.

Monitoring disabled

The projector is not being monitored. If you right-click the icon and

select Monitoring enabled, the projector will be added to the

projectors that are being monitored.

Data being updated

Projector

No warnings or problems

Warning or problem

Notification

Monitoring disabled

Data being updated

Projector

Network error (Monitor Password authentication error)

No Monitor Password was entered when the projector was

registered, or an incorrect Monitor Password was entered. s p.13,

p.16,

p.17

Network error (TCP connection error)

Network error (ESC/VP.net communication error)

*1 When Temperature level display group view is set to On at Environment

setup in the Tool menu, an icon indicating the internal temperature of the

projector will be displayed on top of the projector icon. The default setting

is Off. As you can get an idea of how the temperature inside the projector is

increasing when Temperature level is displayed, you can make

improvements to the projector's operating environment before a high

internal temperature error or high-temperature warning occur. s

*2 Check the following items.

- Check that the projector's power is turned on.

- Check that the LAN cable is connected.

- Check that Standby Mode is set to Communication On (or Network On)

or Network Monitoring is set to On in the projector's configuration menu.

*3 Check that the projector has been correctly connected to the network.

The projector information that is generated when a problem is detected is

stored until EasyMP Monitor is closed. EasyMP Monitor displays will not

be updated automatically even if the projector status returns to normal.

Click "Refresh" in the main window to update the status.

Using the icons in Grouping view

The following icon operations can be carried out in Grouping view.

p.28