Epson 3880 - Stylus Pro Color Inkjet Printer Manuale di rete - Pagina 19

Sfoglia online o scarica il pdf Manuale di rete per Stampante All in One Epson 3880 - Stylus Pro Color Inkjet Printer. Epson 3880 - Stylus Pro Color Inkjet Printer 39. Printer
Anche per Epson 3880 - Stylus Pro Color Inkjet Printer: Opuscolo (3 pagine), Specifiche tecniche (2 pagine), Opuscolo e specifiche (8 pagine), Inizia qui (2 pagine), Iniziare qui Manuale (6 pagine), Garanzia limitata (12 pagine), Manuale di gestione del colore (47 pagine), Opuscolo e specifiche (8 pagine), Manuale di rete (38 pagine), Manuale di avvio rapido (2 pagine)

13. Press u or d to change each octet value, then press r to select the next

octet. When you have changed the value of the last octet, press

then press the

14. Turn the printer off then back on again.

Caution:

After turning off the printer, wait until the status lights go off before turning it

back on; otherwise the network interface may not work correctly.

15. See "Printing a Network Status Sheet" below to print a network status

sheet and confirm the new IP address. For Windows, you'll need the IP

address during setup. You can also use the EpsonNet Config software to

obtain the IP address.

Now you can install the printer software (see "Installing the Printer Software"

on page 20).

Printing a Network Status Sheet

1. Make sure that the printer is not printing and the LCD displays READY.

2. Load three sheets of Letter-size paper.

3. Press the Menu r button on the printer's control panel to enter the printer's

menu system.

4. Press d to highlight TEST PRINT, then press r.

5. Press d to highlight NETWORK STATUS SHEET, then press r.

6. Press

to print the network status sheet.

Cancel/Reset button to exit the printer menu.

Setting Up Your System for Network Printing

and