ACU-RITE 01141 Manuale di istruzioni - Pagina 15
Sfoglia online o scarica il pdf Manuale di istruzioni per Stazione meteorologica ACU-RITE 01141. ACU-RITE 01141 20. Professional weather center
Stampa la paginaTroubleshooting
Problem
Display screen
not working
Inaccurate
temperature or
humidity
No rainfall
Inaccurate wind
readings
If your AcuRite product does not operate properly after trying the
troubleshooting steps, visit www.AcuRite.com or call (262) 729-4852 for
assistance.
• Check that the power adapter is plugged into
the display and an electrical outlet.
• Check that the batteries are installed correctly.
Batteries may need to be replaced.
• Reset the display by pressing and HOLDING
the "RESET" button, located on the back of the
display. Date and time will need to be entered
after a reset.
• Make sure both the display and 5-in-1 sensor
are placed away from any heat sources or vents
(see page 10).
• Make sure both units are positioned away from
moisture sources (see page 10).
• Make sure 5-in-1 sensor is mounted at least 5 ft
off of the ground.
• Check to ensure the rain gauge stabilizer (plastic
tab) has been removed from the bottom of the
sensor (see page 7).
• Clear debris, such as leaves, out of the rain
collector funnel and debris screen.
• Calibrate the Rain Gauge (see page 17).
• Verify the sensor's internal tipping lever is
moving freely by dripping a little water through
the rain collector. You should hear the lever
tipping. If you do not hear it, you may need to
clean inside the sensor. Video available at
www.acurite.com/5in1.
• What is wind reading being compared to? Pro
weather stations are typically mounted at 30 ft
high or more. Make sure to compare data using
a sensor positioned at the same mounting height.
• Check location of the sensor. Ensure it's mounted
a minimum of 5 ft in the air with no obstructions
around it (within several feet).
• Ensure wind cups are spinning freely. If they
hesitate or stop try lubricating with graphite
powder or spray lubricant.
15
Possible Solution