Epson 7880 - Stylus Pro Color Inkjet Printer Manuale - Pagina 5
Sfoglia online o scarica il pdf Manuale per Stampante All in One Epson 7880 - Stylus Pro Color Inkjet Printer. Epson 7880 - Stylus Pro Color Inkjet Printer 12. Warranty statement
Anche per Epson 7880 - Stylus Pro Color Inkjet Printer: Manuale di installazione rapida (1 pagine), Manuale di rete (46 pagine), Garanzia limitata (12 pagine)
Stampa la pagina
Menu setting
Description
INTERFACE
Selects an interface for receiving print jobs.
to automatically select the interface
AUTO
when it receives a print job
USB
to receive only print jobs sent to the USB
interface
NETWORK
network interface
CODE PAGE
Selects the code page for your data
for extended graphics data codes
PC437
for multilingual data codes
PC850
ROLL PAPER
Selects the margins for roll papers.
MARGIN
DEFAULT
TOP/BOTTOM 15 mm
TOP 35/BOTTOM 15 mm
(all around)
3 mm
15 mm
PAPER SIZE CHECK
Selects whether the printer checks to see if the
width of the loaded paper matches the width
selected in your print job (
PAPER SKEW
Selects whether the printer alerts you if paper is
CHECK
not feeding straight by displaying
on the LCD display and stopping printing. If you
select
OFF
the print job is out of range of the loaded paper.
TIME OUT
Selects the time interval before cancelling a
print job if the printer cable is unplugged or the
printer hangs (range is 30 to 300 seconds).
CUTTER
Prints cutter adjustment patterns and allows
ADJUSTMENT
you to adjust the cutting position if you print
with no top or bottom margins.
REFRESH MARGIN
Selects whether to automatically leave an extra
margin area after borderless print jobs.
AUTO NOZZLE
Selects whether to automatically check the
CHECK
print head nozzles before printing each print job.
Do not select
paper narrower than 8.26 inches (210 mm).
(Available only when AUTO CLEANING setting
is set to
AUTO CLEANING
Selects whether to automatically check and
clean the print head, if necessary, when you run
a nozzle check from the control panel or printer
driver. Do not select
media or paper narrower than 8.26 inches
(210 mm).
QUIET CUT
Selects whether to cut printouts slowly to
decrease cutting noise and paper particles.
INITIALIZE
Resets the PRINTER SETUP menu settings to
SETTINGS
their default settings.
TEST PRINT menu
NOZZLE CHECK
Prints a nozzle check pattern
STATUS SHEET
Prints a sheet showing the status of various
printer parts and settings
NETWORK STATUS
Prints a sheet showing the network settings;
SHEET
see the on-screen Network Guide for details.
5 - Epson Stylus Pro 7880/9880
to receive only print jobs sent to the
(15 mm all around)
(3 mm left/right)
(3 mm left/right)
(all around)
is recommended).
ON
PAPER SKEW
, you do not receive an error even if
if using non-Epson media or
ON
.)
ON
if using non-Epson
ON
Menu setting
JOB
INFORMATION
CUSTOM PAPER
PRINTER STATUS menu
VERSION
PRINTABLE PAGES
INK LEVEL
MAINTENANCE
TANK
USAGE COUNT
CLEAR USAGE
COUNT
JOB HISTORY
TOTAL PRINTS
SERVICE LIFE
EDM STATUS
CUSTOM PAPER menu
PAPER NUMBER
PLATEN GAP
THICKNESS
PATTERN
THICKNESS
NUMBER
CUT METHOD
PAPER FEED
ADJUST
DRYING TIME
10/07
Epson Stylus Pro 7880/9880
Description
Prints a sheet showing information about the
last 10 print jobs.
Prints information about paper configurations
you have created
Displays the printer's firmware version number.
Displays an estimate of the number of pages
that can be printed based on the ink cartridge
status.
Displays the status of the ink in the cartridges.
Displays the status of the maintenance tank.
Displays the approximate amount of ink and
paper used.
Clears the values displayed in USAGE COUNT.
Displays the approximate amount of ink and
paper used in the last 10 print jobs.
Displays the total number of pages printed.
Displays the service life of each printer part.
For future enhancements to the printer; no
settings necessary.
Selects the number for each special paper
configuration you create using the settings
below.
Adjusts the distance from the print head to the
paper.
STANDARD
for most printing
or
if images are smeared
WIDE
WIDER
for thin paper
NARROW
WIDEST
for thick paper
Prints a thickness patterns so you can select a
THICKNESS NUMBER setting below.
Selects the thickness number for the best
pattern printed using the THICKNESS PATTERN
setting above.
Selects the cutting blade pressure you want to
use for the paper.
STANDARD
THIN PAPER
THICK PAPER, FAST
THICK PAPER, SLOW
Adjusts the amount of paper fed during printing
to help eliminate banding (–0.70 to 0.70%).
Choose a lower value if you see white lines on
your prints, or a higher value if you see dark
lines.
Selects a drying time for ink to avoid smearing
(from 0 to 10 seconds).