Epson AcuLaser CX11N Iniziare qui Manuale - Pagina 3

Sfoglia online o scarica il pdf Iniziare qui Manuale per Stampante All in One Epson AcuLaser CX11N. Epson AcuLaser CX11N 8. Multi-function colour laser printers
Anche per Epson AcuLaser CX11N: Funzionamento di base Gude (26 pagine), Manuale d'uso (17 pagine), Specifiche tecniche (4 pagine), Manuale di configurazione (32 pagine), Manuale supplementare (6 pagine), Aggiornamento (1 pagine), Bollettino di assistenza prodotti (5 pagine), Specifiche tecniche (4 pagine)

Stampa la pagina

Epson AcuLaser CX11N Iniziare qui Manuale

Install Photoconductor

Caution: Make sure the CX11N is turned on and you have installed all the toner

cartridges, as described in the previous section.

Install Photoconductor appears in the LCD screen. Lift up the scanner.

Lift up cover B and raise the orange lever

inside, on the right.

Remove the photoconductor from its package

and pull off the protective sheet.

Caution: Do not touch the belt on the top

of the photoconductor or the blue roller beneath

it; otherwise, print quality may decrease.

Avoid exposing the photoconductor to light any longer than necessary.

Do not touch any other components inside the CX11N.

Hold the photoconductor by

its handle and insert it into the

slots marked with blue arrows

inside the CX11N. Push it in

until it clicks into place.

Flip down the orange lever,

then close cover B.

Pull out the extension tray if necessary. Lower the scanner unit to its

original position.

Set Fax/Printer Information

CX11NF

Select the Country: Press the

then press the

Select the Language: Press the

then press the

Set the Date and Time: Press the

month, day, hour, and minute. Press the

item. The CX11NF then resets itself and reboots.

Turn off the CX11NF.

Connect an RJ-11 cord to

the telephone line interface

on the CX11NF and to the

RJ-11 jack on the wall.

Note: An RJ-11 cord is not

included with the CX11NF.

Turn on the CX11NF.

CX11N

Press the

The Setup light turns on and the LCD screen shows Setup Mode for a

few seconds, then changes to the Setup menu screen.

Press the ▼ button until Printer Settings is selected, then press the

button.

Press the ▼ button until Setup Menu is selected, then press the

button.

Setup button.

button to select the country,

button to select the language,

button to select the year,

button after selecting each