Cisco Catalyst IW6300H-DCW Manuale di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di installazione per Punto di accesso wireless Cisco Catalyst IW6300H-DCW. Cisco Catalyst IW6300H-DCW 28.

Mounting the Access Point on a Wall

Materials Required

Electric drill and standard screwdriver

#6-AWG ground wire

Shielded outdoor-rated Ethernet (CAT5e or better) cable

Grounding block

Grounding rod

13-mm box-end wrench or socket set

Caution

The mounting surface, attaching screws, and optional wall anchors must be able to support a 50-lb(22.7 kg)

static weight.

The mounting bracket can be used as a template to mark the screw hole locations. To mount the access point

on a vertical wall, follow these instructions:

Procedure

Step 1

Use the mounting bracket as a template to mark four screw hole locations on your mounting surface. You can

optionally use the individual mounting holes or the mounting slots.

Figure 3: Mounting Bracket Dimension

Installing the Access Point

Kit