Epson C1100 - AcuLaser Color Laser Printer Manuale di configurazione

Sfoglia online o scarica il pdf Manuale di configurazione per Stampante All in One Epson C1100 - AcuLaser Color Laser Printer. Epson C1100 - AcuLaser Color Laser Printer 2. Colour laser printer
Anche per Epson C1100 - AcuLaser Color Laser Printer: Manuale informativo (4 pagine), Specifiche tecniche (4 pagine), Manuale di configurazione (8 pagine), Manuale inceppamento carta (3 pagine), Specifiche tecniche (4 pagine)

Setup Guide

Notes

contain important information and useful tips on the operation of your

printer.

Finding a Place

The illustration shows the recommended amount of space. For

information and cautions, see the Safety Instructions sheet.

Removing the Protective

Materials

Plugging in the Printer

Installing Consumables

4049771-02

For specifications and handling precautions, see the Reference Guide.

XXX

Toner Cartridges and Photoconductor Unit

1. Make sure the printer is turned on, then open cover A.

Note:

The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan,

Magenta, Yellow, and Black respectively.

2. Remove the cover from inside of the printer.

3. Shake the toner cartridge enough.

4. Hold the tag and gently pull the toner seal upward.

5. Insert the toner cartridge firmly with aligning the arrow mark.

6. Lock the toner cartridge.

7. Close the cover A.

8. Repeat 1 to 7 steps to install other toner cartridges.

9. Make sure the printer is turned on, then open the cover B.

10. Raise the yellow lever up.

11. Take the photoconductor unit out of its package, then remove the

protective sheet.

12. Insert the photoconductor unit firmly with aligning the arrow marks

on the printer.

13. Push the yellow lever down, then close the cover B.

Loading Paper

1. Open the MP tray cover, then slide the right paper guide outward.

2. Set A4 or Letter size paper into the tray with the printable side facing

up, then close the MP tray cover.

Testing the Printer

1. Make sure the printer is turned on.

2. Make sure the LCD panel shows Ready. Press the

Enter button

three times. The printer starts printing a status sheet.

Note:

If you are unable to get the printer to print a normal status sheet or you have

a problem with print quality, see "Problem Solver" in the Reference Guide.

Turn over