Cisco Meraki MR20 Manuale di installazione - Pagina 11

Sfoglia online o scarica il pdf Manuale di installazione per Punto di accesso wireless Cisco Meraki MR20. Cisco Meraki MR20 12.

Secure the MR20

Depending on your mounting environment, you may want to secure the MR20 to its mount location. If the MR20 has

been installed using the mount cradle, it should be secured via security screw (Torx security screws are included).

Power the MR20

If mounting to an electrical junction box, feed the Ethernet cable through the cable access hole in the mount cradle. If

mounting to a wall or ceiling, the Ethernet cable will feed from behind the MR20. The

this document lists the different powering options and their unique characteristics.

Verify Device Functionality and Test Network Coverage

1. Check LEDs

a. The Power LED should be solid green (or blue, if clients are connected). If it is ﬂashing blue, the ﬁrmware is

automatically upgrading and the LED should turn green when the upgrade is completed (normally within a

few minutes). See the

b. Note: Your MR20 must have an active route to the Internet to check and upgrade its ﬁrmware.

2. Verify access point connectivity

a. Use any 802.11 client device to connect to the MR20 and verify proper connectivity using the client's web

browser.

3. Check network coverage

4. Conﬁrm that you have good signal strength throughout your coverage area. You can use the signal strength meter

on a laptop, smart phone, or other wireless device.

Reference the

MR Product Page

"LED

Indicators" section for more details. .

for additional information and troubleshooting tips.

"Power Source

Options" section of