Cisco MERAKI MR34 Manuale di installazione - Pagina 14

Sfoglia online o scarica il pdf Manuale di installazione per Punto di accesso wireless Cisco MERAKI MR34. Cisco MERAKI MR34 15.

Install the security screw in the lower mount cradle tab.

Kensington Lock

Attach a Kensington lock cable to the access point at the hard point on the side of the device.

Attach the other end of the cable to a secure location, such as a pipe or building ﬁxture.

1. Check LEDs

a. The Power LED should be solid green (or blue, if clients are connected). If it is ﬂashing blue, the ﬁrmware is

automatically upgrading and the LED should turn green when the upgrade is completed (normally within a

few minutes). See the

b. Note: Your MR34 must have an active route to the Internet to check and upgrade its ﬁrmware.

2. Verify access point connectivity

a. Use any 802.11 client device to connect to the MR34 and verify proper connectivity using the client's web

browser.

3. Check network coverage

4. Conﬁrm that you have good signal strength throughout your coverage area. You can use the signal strength meter

on a laptop, smart phone, or other wireless device.

Reference the

MR Product Page

"LED

Indicators" section for more details. .

for additional information and troubleshooting tips.