Cisco NCS 4201 Manuale di installazione - Pagina 12

Sfoglia online o scarica il pdf Manuale di installazione per Punto di accesso wireless Cisco NCS 4201. Cisco NCS 4201 42.

Installing the Power Supply

The Cisco NCS 4201 provides the choice of two different power supplies:

• DC power—-48 V/60 Vdc or 24 Vdc

The DC power supply uses 2 position terminal block-style connector. The terminal block connector is of

suitable size to carry the appropriate AWG wire size to handle the input current of the power supply. ON/OFF

switch is provided.

• AC power—100 VAC to 240 VAC

The AC power supply has an IEC 320-type power receptacle and a 15-A service connector. You can use

standard straight power cords with the AC power supply. The power supply includes a power cord retainer

clip that can only accept straight power cords. No ON/OFF switch is provided.

Each power supply provides a single primary input power connection. You can install dual-power supplies

for redundancy.

Warning

Read the installation instructions before connecting the system to the power source. Statement 1004

Products that have an AC power connection are required to have an external surge protective device (SPD)

Note

provided as part of the building installation to comply with the Telcordia GR-1089 NEBS standard for

electromagnetic compatibility and safety.

Do not use interface module or power supply ejector handles to lift the chassis; using these handles to lift

Caution

the chassis can deform or damage the handles.

The following sections provide more information on the Cisco NCS 4201 power supplies:

Preventing Power Loss

Use the following guidelines to prevent power loss to the chassis:

• To prevent loss of input power, ensure that the total maximum load on each circuit supplying the power

• In some systems, you can use an UPS to protect against power failures at your site. Avoid UPS types

Power Connection Guidelines

This section provides guidelines for connecting the Cisco NCS 4201 power supplies to the site power source.

Cisco NCS 4201 Hardware Installation Guide

supplies is within the current ratings of the wiring and breakers.

that use ferroresonant technology. These UPS types can become unstable with systems such as the Cisco

NCS 4201, which can have substantial current-draw fluctuations due to bursty data traffic patterns.

Installing the Cisco NCS 4201