Digitaltech-Market EDIC-mini Tiny+ Manuale operativo - Pagina 5

Sfoglia online o scarica il pdf Manuale operativo per Registratore vocale Digitaltech-Market EDIC-mini Tiny+. Digitaltech-Market EDIC-mini Tiny+ 11. Dvr

Stampa la pagina

DVR Operating

Start and Stop Recording

To start recording, move the switch to «ON». The LED flashes five times, and the

recorder starts recording. During recording DVR indicates battery charge level and free

memory space by 2 series of LED flashes.

The first series of flashes indicates the battery charge level at the moment of recording

start (for models powered by batteries) or current rechargeable battery charge level (for

models powered by rechargeable batteries):

1 flash – (almost) fully charged battery (80-100% charge)

2 flashes – enough to work (20-80% charge)

3 flashes – almost discharged battery (0-20% charge)

T he second series of flashes indicates free memory available:

1 flash – 100-76%

2 flashes – 75-51%

3 flashes – 50-26%

4 flashes – 25-1%

The interval between the first and second series of flashes is approximately 4 seconds,

and between the second and first is about 8 seconds.

Attention! In recorders powered by batteries the first series of flashes shows battery

charge at the time the recorder has been activated and is not controlled during recording.

If LED flashes slowly 3 times after turning on, it means that the battery or

rechargeable battery is fully discharged. If LED flashes quickly 3 series by 3 times

each after turning on, it means that there is no free memory space.

To stop recording, move the switch to «OFF» position. The LED flashes once for 10-12

seconds and the recorder stops recording.

After stopping, the DVR goes to stand-by mode. In stand-by mode the DVR has low

power consumption and does not demand battery replacement or rechargeable battery

charging (depending on the model) for a long period time.

If there is not enough memory to continue the recorder or battery/rechargeable battery is

discharged while recording, the record is stopped and DVR turns to stand-by mode

automatically.

Attention:

• Avoid using the recorder with nearly discharged battery, otherwise it may turn off at

the wrong moment.

• The higher the record's sampling rate, the more energy is consumed by the recorder. At

the frequency of 22 kHz the consumption is twice higher than at 8 kHz, and for the

recorders with batteries the autonomy is down by more than three times.

• Fast switching during recording (On → Off → On) puts the tab which is visible in the

Sound Processor program. Thus it is possible to mark the desired parts of records and

then quickly find them.

• Fast switching when the recorder is off (Off → On → Off) shows battery charge level

the and free memory capacity through flashing of LED. For this indication, see «Start

and Stop Recording.»