Cisco WAP131 Manuale di avvio rapido - Pagina 2

Sfoglia online o scarica il pdf Manuale di avvio rapido per Punto di accesso wireless Cisco WAP131. Cisco WAP131 13. Reboot and reset factory default settings
Anche per Cisco WAP131: Manuale di avvio rapido (13 pagine), Manuale (4 pagine), Manuale (4 pagine)

Stampa la pagina

Welcome

Thank you for choosing the Cisco WAP131 Wireless-N Dual Radio Access

Point with PoE. The Cisco WAP131 is an indoor concurrent dual-band radio

802.11n access point with Power over Ethernet (PoE).

This guide provides the general layout of the Cisco WAP131, describe how

to deploy the Cisco WAP131 in your network, and describe how to

configure the Cisco WAP131. For additional information, see

www.cisco.com/go/100_wap_resources.

Before You Begin

Before you begin the installation, make sure that you have the following

equipment and services:

• A computer with browser support for:

–

Internet Explorer 7.0 or later

–

Chrome 5.0 or later

–

Firefox 3.0 or later

–

Safari 3.0 or later

• One or more Ethernet network switches with PoE

Cisco WAP131 Features

Front Panel

The front panel of the Cisco WAP131 consists of three lights: Power,

WLAN, and LAN. For full descriptions of the colors of the lights and their

indications, see

Back Panel

RESET—See

"Rebooting the Cisco WAP131 or Resetting to Factory

Defaults"

for information on the RESET button.

LAN (PoE)—The RJ-45 Ethernet port is used to power the Cisco WAP131

using PoE. It is an auto-sensing, Gigabit Ethernet (802.3) port used to

connect the Cisco WAP131 to network devices, such as computers,

routers, or switches. We strongly recommend that you use a Category

5e or better cable for gigabit connectivity.

"Verifying the Hardware

Installation".

Cisco WAP131 Quick Start Guide