Epson CX4800 - Stylus Color Inkjet Manuale d'uso - Pagina 14
Sfoglia online o scarica il pdf Manuale d'uso per Stampante All in One Epson CX4800 - Stylus Color Inkjet. Epson CX4800 - Stylus Color Inkjet 18. Epson scan icm updater v1.20 (psb.2008.07.001)
Anche per Epson CX4800 - Stylus Color Inkjet: Manuale rapido (48 pagine), Iniziare qui Manuale (8 pagine), Breve descrizione tecnica (6 pagine), Aggiornamento (1 pagine)
Stampa la pagina
Epson Stylus CX4200 Series/Epson Stylus CX4800 Series
Checking the Ink Supply
To check your ink supply, do the following:
❏ Windows: Double-click the
lower right corner of your screen). You see a window like
the following:
❏ Macintosh OS X: Open the
EPSON Printer Utility
printer list, click
, and select
OK
You see a window like this:
Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once
you start replacing a cartridge, you must complete all the steps
in one session.
Warning:
Keep ink cartridges out of the reach of children.
Be careful when you handle used ink cartridges; there may be ink
remaining around the ink supply port. If ink gets on your skin, wash
it off with soap and water. If it gets in your eyes, flush them
immediately with water.
14
icon on your taskbar (in the
folder and select
Applications
. Select your Epson Stylus CX in the
EPSON StatusMonitor
Click a cartridge
image to display
information
about it.
Caution:
Do not put your hand inside the Epson Stylus CX all-in-one or touch
any cartridges during printing.
If you remove an ink cartridge for later use, protect the ink supply
area from dirt and dust and store it in the same environment as the
Epson Stylus CX. Note that there is a valve in the ink supply port,
making covers or plugs unnecessary, but care is needed to prevent
the ink from staining items that the cartridge touches. Do not touch
the ink cartridge ink supply port or surrounding area.
Leave the empty cartridge installed until you have obtained a
replacement, or the ink remaining in the print head nozzles may dry
out, preventing the Epson Stylus CX from printing. To ensure good
results, use genuine Epson ink cartridges and do not refill them.
Other products may cause damage to your Epson Stylus CX not
covered by Epson's warranty.
1. Make sure the Epson Stylus CX is on.
2. Make sure that the document cover is closed, then open the
scanner.
.
Caution:
Do not open the scanner when the document cover is open.
3. Press and release the B ink button. The
lights flash.
Note:
Do not hold down the
the printer will start to clean the print head.
If one of the cartridges is low or empty, the Epson Stylus
CX moves that cartridge to the _ ink out mark. Go to
step 4.
If no cartridges are low or empty, the ink cartridge holder
moves to the ink replacement position. Go to step 5.
5/05
and B ink
P On
B
ink button for more than 3 seconds or