Cisco WBP54G - Small Business Pro Wireless-G Bridge Manuale d'uso - Pagina 13
Sfoglia online o scarica il pdf Manuale d'uso per Punto di accesso wireless Cisco WBP54G - Small Business Pro Wireless-G Bridge. Cisco WBP54G - Small Business Pro Wireless-G Bridge 50. Bridge for phone adapters
Anche per Cisco WBP54G - Small Business Pro Wireless-G Bridge: Manuale di installazione rapida (2 pagine)
Stampa la paginaWireless-G Bridge for Phone Adapters
3. This screen will inform you about which Linksys phone adapters and IP phones work with the Bridge. Make
sure your phone adapter or IP phone is listed on-screen. Click Next to proceed with the installation process,
or click Back to return to the previous screen. To exit the Setup Wizard, click Exit.
NOTE: The power adapter for your Linksys phone adapter or IP phone will be used to
power the Bridge.
4. You will use the PC running this Setup Wizard to set up the Bridge. Disconnect the power jack from the back
of the Linksys phone adapter or IP phone. (You will use this power adapter to power the Bridge.) If your
network router or this PC is in a different room, disconnect the power adapter from the electrical outlet. Move
the power adapter and Bridge to the room where your router or PC is located.
Click Next to proceed, or click Back to return to the previous screen.
Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters
Running the Setup Wizard
Figure 4-3: Check for Compatibility Screen
Figure 4-4: Disconnect the Power from the Phone
Adapter or IP Phone Screen
8