Epson CX7800 - Stylus Color Inkjet Manuale - Pagina 14
Sfoglia online o scarica il pdf Manuale per Stampante All in One Epson CX7800 - Stylus Color Inkjet. Epson CX7800 - Stylus Color Inkjet 19. Epson scan icm updater v1.20 (psb.2008.07.001)
Anche per Epson CX7800 - Stylus Color Inkjet: Specifiche tecniche (2 pagine), Breve descrizione tecnica (6 pagine), Manuale di avvio rapido (12 pagine), Iniziare qui Manuale (8 pagine), Aggiornamento (1 pagine)
Stampa la pagina
Epson Stylus CX7800
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the
nozzles in the print head may be clogged or ink may be
running low in one or more of the ink cartridges. Follow the
steps below to check the print head nozzles.
1. Make sure the Epson Stylus CX7800 is turned on but not
printing, and the H ink low icon is not displayed in the
upper-left corner of the LCD screen. (If the H ink low icon
is displayed, you need to replace an ink cartridge; see
page 15.)
2. Load a few sheets of letter-size plain paper.
3. Press the
Setup/Utilities
4. Press the l or r
Photo/Options
.
Nozzles
5. Press the
button. The nozzle check pattern prints:
x Start
Print head does
not need to be
cleaned:
Print head needs
to be cleaned:
6. If there are no gaps or lines, press the
button to return to the previous mode.
If there are gaps or lines, or the test patterns are faint, clean
the print head as described below.
Note:
You can also check the nozzles with software when connected to a
computer; see your on-screen User's Guide for details.
Cleaning the Print Head
If your printouts are unexpectedly light or faint, or you notice
light or dark bands across your printout, you may need to
clean the print head. This unclogs the nozzles so they can
deliver ink properly. Run a nozzle check as described on
page 14 to see if the print head needs cleaning.
14
Epson Stylus CX7800
-
button.
button to select
Check Ink
Setup/Utilities
Note:
Print head cleaning uses ink, so clean it only if quality declines and the
nozzle check indicates that the print head needs to be cleaned.
1. Make sure the Epson Stylus CX7800 is turned on but not
printing, and the H ink low icon is not displayed in the
upper-left corner of the LCD screen. (If the H ink low icon
is displayed, you need to replace an ink cartridge before
cleaning the print head; see page 15.)
2. Load a few sheets of letter-size plain paper.
3. Press the
Setup/Utilities
4. Press the l or r
Photo/Options
. Then press the x
Print Head
5. Press the x
Start
The Epson Stylus CX7800 runs a head cleaning cycle and
the processing icon appears on the LCD screen. Cleaning
takes approximately 30 seconds.
Caution:
Never turn off the Epson Stylus CX7800 while head cleaning is in
progress. You may damage it.
6. When cleaning finishes, make sure paper is loaded in the
Epson Stylus CX7800. Press the l or r
button to select
Check Ink Nozzles
button.
Print head does
not need to be
cleaned:
Print head needs
to be cleaned:
7. If there are no gaps or lines, press the
button to return to the previous mode.
If there are gaps or lines, or the test patterns are faint, clean
the print head again.
8/05
button.
button to select
button.
Start
button again.
Photo/Options
. Then press the x
Setup/Utilities
Clean
Start