Cisco 500 Series Manuale - Pagina 15

Sfoglia online o scarica il pdf Manuale per Sistema di conferenze Cisco 500 Series. Cisco 500 Series 24. Stackable managed switches
Anche per Cisco 500 Series: Manuale di informazioni sulla sicurezza (42 pagine), Manuale (4 pagine), Quide di avvio rapido (13 pagine), Manuale di avvio rapido (21 pagine), Scheda tecnica (5 pagine), Manuale d'uso (4 pagine), Manuale d'uso (6 pagine), Manuale d'uso (46 pagine), Manuale (40 pagine), Manuale di amministrazione (48 pagine), Risoluzione dei problemi e manutenzione (15 pagine), Manuale di riferimento rapido (7 pagine), Manuale di avvio rapido (25 pagine)

Accessories

• Cisco Headset 560 Series: Connect the standard base or multibase with the USB or Y-cable.

Procedure

Step 1

On the phone, press Applications

Step 2

Select Accessories > Setup > Reset settings.

Step 3

At the warning window, select Reset.

Adjust the Headset Feedback

When you use a headset, you can hear your own voice in the earpiece, which is called headset sidetone or

headset feedback. You can control the amount of headset sidetone on your phone.

Procedure

Step 1

Press Applications

Step 2

Select Settings > Headset sidetone.

Step 3

Select a setting.

Set Up a Wideband Standard Headset

You can use a headset that supports wideband audio. Wideband audio improves the quality of the sound you

hear in the headset.

Procedure

Step 1

Press Applications

Step 2

Select Accessories > Analog headset > Setup.

Step 3

Press On or Off to enable or disable wideband for the analog headset.

Step 4

Press Return .

Enable Electronic Hookswitch Control on Your Phone

If your administrator has enabled Admin settings on your Cisco IP Phone, you can enable or disable electronic

hookswitch control to connect with a Cisco Headset 560 Series base. Electronic hookswitch control is enabled

by default.

Note

This feature is available on Cisco IP Phone Firmware Release 12.7(1) and later.

Adjust the Headset Feedback

Accessories