Digitana VCS3 MKII Quad Midi-CV Manuale d'uso - Pagina 8

Sfoglia online o scarica il pdf Manuale d'uso per Apparecchiature di registrazione Digitana VCS3 MKII Quad Midi-CV. Digitana VCS3 MKII Quad Midi-CV 13.

Stampa la pagina

The CV1-CV4 sources are thus :-

Input Ch1

Joystick (Seq)

Then use patch pins to simply patch CV1, CV2 or CV3 to any desired input. E.g. in PolyMode2 for

duophonic sequencer use, CV1 (which is the pitch CV1 in polymode2 ) can be patched to osc 1

and CV2 (pitch CV2 in polymode2) patched to osc 2 frequency control. So insert pins at I8 and J9

on the matrix. Row 16 (Joystick vertical control) can be used e.g. as modulation CV connected to

filter cutoff, reverb mix, Output channel levels etc by inserting appropriate pins.

Secret trick of the Synthi: How to invert a signal without mods!

The various synthi control inputs (marked 'control inputs' on the matrix ) respond

differently to positive/negative control voltages. So for example the trapezoid envelope is a

positive voltage which can be applied to filter frequency, oscillator pitch, envelope decay

etc. But its useful to be able to invert the trapezoid and make it negative as the response is

interesting and different.

People have 'mods' done to their Synthi that allow inversion of signals whilst being routed,

by a special pin cable and additional circuits.

But if you dont mind sacrificing one of the 2 input channels, there is a way of achieving this

WITHOUT any mods!

The reason I mention this inversion trick is that it can also be applied to any of the midi

generated CV1-CV4 from the Quad unit..so it adds even more to the creativity of the unit.

Green pin on

CV1

special cable

Blue pin on special

CV2

cable

Yellow pin on

CV3

special cable

CV4 is only available via the special

CV4

EMS pin cable (black pin)