ACU-RITE 75108SBDI Manuale di istruzioni - Pagina 11

Sfoglia online o scarica il pdf Manuale di istruzioni per Stazione meteorologica ACU-RITE 75108SBDI. ACU-RITE 75108SBDI 16.

Troubleshooting

No outdoor sensor

reception

no bars

Display screen

not working

Outdoor

temperature

is flashing or

showing dashes

Inaccurate

temperature

or humidity

If your AcuRite product does not operate properly after trying

the troubleshooting steps, visit www.AcuRite.com or call

(877) 221-1252 for assistance.

If the wireless signal indicator shows no bars:

• Relocate the display unit and/or the outdoor sensor.

The units must be within 330 ft (100 m) of each other.

• Make sure both units are placed at least 3 feet

(.9 m) away from electronics that may interfere with

the wireless communication (such as TVs, microwaves,

computers, etc).

• Use standard alkaline batteries (or lithium batteries in

sensor when temperature is below -4ºF/-20ºC). Do not

use heavy duty or rechargeable batteries. NOTE: It

may take a few minutes for display unit and sensor to

synchronize after batteries are replaced.

• Check that the power adapter is plugged into the

display and an electrical outlet.

Flashing of the outdoor temperature is generally an

indication of wireless interference.

1. Bring both the sensor and display unit indoors and

remove at least one battery from each.

2. Make sure the A-B-C switch on both units match.

3. Reinstall the batteries in the outdoor sensor.

4. Reinstall the batteries in the display unit.

5. Let the units sit within a couple feet of each other

for a few minutes to gain a strong connection.

• Make sure both the display unit and sensor are

placed out of direct sunlight and away from any heat

sources or vents (see page 8).

• Make sure both units are positioned away from

moisture sources (see page 8).