Cisco EX90 Manuale introduttivo - Pagina 28

Sfoglia online o scarica il pdf Manuale introduttivo per Sistema di conferenze Cisco EX90. Cisco EX90 42. Telepresence system
Anche per Cisco EX90: Manuale d'uso (50 pagine), Manuale di riferimento rapido (2 pagine), Manuale d'uso (37 pagine), Manuale d'uso (49 pagine), Manuale di riferimento rapido (2 pagine), Manuale d'uso (45 pagine), Manuale di installazione (6 pagine), Manuale di riferimento rapido (2 pagine), Manuale d'uso (7 pagine), Manuale di risoluzione dei problemi (37 pagine), Manuale di installazione (2 pagine), Manuale d'uso (45 pagine), Manuale d'uso (37 pagine), Manuale introduttivo (46 pagine)

Stampa la pagina

Cisco TelePresence Systems

GettinG started Guide

Table of contents

Introduction

Web interface

Setting the date, time and location

(when not set by a provisioning system)

When setting up your video conference system, you

should check that the date and time settings are correct.

Among other things this information is used to time stamp

messages transmitted to gatekeepers and other network

elements.

If you operate your system using the Touch controller, the

time is shown in the top right corner of the Touch controller

display; if you operate your system using a remote control,

the time and date is shown in the top right corner of the

main display.

Back to task overview

User interfaces

Configuration

1. Go to the

Configuration

tab and select

Configuration.

Open the

Time

settings from the left column.

2. Select your preferred date format in the

drop down list.

3. Select your preferred time format in the

drop down list.

4. Select your time zone in the

5. Open the

NetworkServices

folder and then the

folder.

Select Auto,

Manual

Off

in the

If you select

Manual,

enter the NTP server address in the

Address

input field. Click

to save the change.

If you select Off, you have to enter the time and date

manually using either the Touch controller

Settings > Administrator Settings > Date, Time &

Location) or the remote control and on-screen menu

system

(Home > Settings > Date and

NTP mode:

Auto:

The time is regularly updated using an NTP server. The

NTP server address is automatically obtained from the

network (DHCP).

Manual: The time is regularly updated using an NTP server. You

must manually enter the NTP server address.

Off:

You must set the time manually. The time will not be

updated automatically.

Appendices

Advanced

DateFormat

TimeFormat

Zone

drop down list.

NTP

Mode

drop down list.

(More >

Time).