Cable Electronics CE Labs SW808HD Manuale di istruzioni - Pagina 13

Sfoglia online o scarica il pdf Manuale di istruzioni per Commutatore a matrice Cable Electronics CE Labs SW808HD. Cable Electronics CE Labs SW808HD 17. High definition matrix switch

Stampa la pagina

Step 2: First select the Output number keys 02, 03 and 05 to the

right, and select the Input number key 01 to the bottom.

Then, consecutively press the previously selected Output

number keys 02, 03 and 05 (or press the Deselect all

output key). This selects Input 01 to be routed to Outputs

02, 03, and 05.

Step 3: First select the Output number key 06 to the right, and

select the Input number key 03 to the bottom. Then, press

the previously selected Output number key 06 (or press

the Deselect all output key). This selects Input 03 to be

routed to Output 06.

Example 2 (Video Only Switching):: Using a SW808HD matrix having all

the input/output ports properly connected to the equipment. To set the

input/output connectors to switching from video channel 1 to output

channels number 1, 6 and 7 and also to switch from audio channel 2 to

output channel 8. There are two ways of operations:

First method: In the lower right corner of the blue area, enable the Video

and disable the Audio functions (check/uncheck the white boxes). To

complete the switching operation, click on the corresponding

corresponding directly to the INPUT number key 01 and the OUTPUT

number keys 01, 06, and 07 on the matrix to turn them into

Second method: The following 4 steps, completes the operation of

switching video channel 1 to output channels 1, 6, and 7 while also

switching audio channel 2 to output channel 8.

Step 1: In the lower right corner of the blue area, enable the

Video and disable the Audio functions (check/uncheck

the white boxes).

Step 2: Select the output number keys 01,06 and 07 to the right

and select the input number key 01 to the bottom.

Then, press the previously pressed output number keys 01,

06, and 07 to the right (or press the Deselect all output

key). This selects video switching of input 01 to utput 01,06

and 07.

Step 3: In the lower right corner of the blue area, disable the

Video and enable the Audio functions (uncheck/check

the white boxes).

Step 4: Select output number key 08 to the right and input

number key 02 to the bottom. Then, press again the

previously pressed output number key to the right (or

press the Deselect all output key). This selects audio

switching of input 02 to output 08.

MATRIX SYSTEM AND CONTROL SYSTEM

CONNECTION - RS-485

PC RS-485, multi-Matrix (up to 32) connections are as shown below.

NOTES:

1. RS-485 baud rate: 9600bps, 8-bit data transmission address, no, odd,

or even parity 1-bit stop address: (9600 – 8 - N - 1).

2. Connect PC RS-485 port to the Matrix RS-485 port:

TX (+) TX (+)

TX (-) TX (-)

RX (+) RX (+)

RX (-) RX (-)

3. Serial connection between Matrix RS-485 ports:

TX (+) TX (+)

TX (-) TX (-)

RX (+) RX (+)

RX (-) RX (-)

4. DIP switch 1-5 addresses must not set to same ID address.

icons

*The terminal

resistance in an

intterfance

that PC offers

must be

opened

RS-232

RS-485 Terminal

RS-485

RS-232

RS-485 Terminal

RS-485

RS-232

RS-485 Terminal

RS-485

RS-232

RS-485 Terminal

RS-485

First (Master)

Terminator ON

Second (Slave)

Thirty-one (Slave)

Thirty-two (Slave)

Terminator ON