Sony BRAVIA 32R408C Manuale di istruzioni per l'uso - Pagina 36
Sfoglia online o scarica il pdf Manuale di istruzioni per l'uso per TV Sony BRAVIA 32R408C. Sony BRAVIA 32R408C 44. Television
Stampa la pagina
No sound or noisy sound
Check if the TV system setting is appropriate
(page 20).
Channels
The desired channel cannot be selected
Switch between digital and analogue mode and
select the desired digital/analogue channel.
Some channels are blank
The channel is for scrambled/subscription service
only. Subscribe to a pay TV service.
Channel is used only for data (no picture or
sound).
Contact the broadcaster for transmission details.
Digital channels are not displayed
Contact a local installer to find out if digital
transmissions are provided in your area.
Upgrade to a higher gain aerial.
Network
What kind of devices can be connected to use
the Screen mirroring function?
Sony Screen mirroring compatible devices
(Xperia) can be connected.
Video or sound sometimes cuts out
Devices emitting radio waves, such as other
wireless LAN devices or microwave ovens, may
interfere with the Screen mirroring function using
wireless LAN. Keep the TV or Sony Screen
mirroring compatible devices (Xperia) away from
such devices, or turn them off if possible.
Communication speed may change according to
the distance or obstacles between devices, device
configuration, radio wave condition, line
congestion or what device you use.
Communication may cut out due to the radio
wave condition.
Some pay contents cannot be played
The source device needs to be compatible with
HDCP (High-bandwidth Digital Content
Protection) 2.0/2.1 system. Some pay contents
may not be displayed via a non-compatible
source device.
Apps are inaccessible
Check that the LAN cable or AC power cord of the
router/modem* has been connected properly.
* Your router/modem must be set in advance to
connect to the Internet. Contact your Internet
service provider for router/modem settings.
36
GB
Try using apps later. The app content provider's
server may be out of service.
Sometimes video streaming quality is poor
when using the wireless LAN
The wireless network connection quality varies
depending on the distance or obstacles (e.g. wall)
between the TV and the wireless router (access
point), environment interference, and quality of
the wireless router (access point).
Wireless LAN connection fails or radio
reception conditions are poor
Check the installation location of the TV and
wireless router (access point). Signal condition
may be affected for the following reasons.
Other wireless devices, microwaves,
fluorescent lights, etc., are placed nearby.
There are floors or walls between the wireless
router (access point) and TV.
If the problem persists even after checking the
above, try making a wired LAN connection.
Poor picture on Internet Video
Quality depends on the original video provided by
the internet contents provider and your
connection bandwidth.
Certain internet contents displays a loss of
detail, especially during fast-motion or dark
scenes
Video quality and picture size depend on
broadband speed and delivery by content
providers.
Good picture quality but no sound on the
internet contents
Quality depends on the original content provided
by the internet contents provider and your
connection bandwidth.
Due to the nature of Internet video, not all videos
will contain sound.
Your TV cannot connect to the server
Check the LAN cable or connection to your server
and your TV.
Check if your network is properly configured on
your TV.
A message appears starting that the TV
cannot connect to your network
Check the current network settings. Press HOME,
then select [Settings]
t
[Set-up]
[Network]
[View Network setting and status]. If all of your
network settings are "-", your server may not be
connected properly. Check your network
connections and/or server's instruction manual
for connection information.
t
t
[System Settings]
t
t
[Network Setup]