DigiTech JAMMAN - MANUAL 2 Manuale d'uso - Pagina 16

Sfoglia online o scarica il pdf Manuale d'uso per Pedale musicale DigiTech JAMMAN - MANUAL 2. DigiTech JAMMAN - MANUAL 2 20. Remote foot controller

Using the Control 2 Remote Foot Controller

knob to select it.

To enable CC send and assign a MIDI CC that the CONTROL

Footswitch will transmit, highlight FC FSW and press the Edit/Select

knob.

Turn the Edit/Select knob to select a MIDI CC and press the knob to

select it.

Expression Pedal Calibration

In order to smoothly control parameters using the Control 2's expression

pedal, the pedal needs to be calibrated the first time it is connected to the

GSP. This is done using the FC Pedal Calibrate menu in the GSP.

To calibrate the Control 2's Expression Pedal, follow these steps:

From the preset screen, press the Edit/Select knob once to enter the

menu navigation system.

Turn the Edit/Select knob until the Foot Controller menu is highlighted

and press the knob again.

In the Foot Controller menu, highlight Pedal Calibrate and press the

Edit/Select knob to start the calibration procedure.

Once started, the Control 2's Display will show TOE DOWN. Rock the

expression pedal full forward and press the flashing TUNER footswitch.

Calibration is now complete.

NOTE: You need to rock the Expression Pedal all the way forward and

all the way back each time you power up the Control 2 to re-establish

its Min and Max positions.

Control 2 Owner's Manual