DigiTech JamMan Express XT Manuale d'uso - Pagina 12

Sfoglia online o scarica il pdf Manuale d'uso per Pedale musicale DigiTech JamMan Express XT. DigiTech JamMan Express XT 18. Stereo looper w/jamsync

Stampa la pagina

DigiTech JamMan Express XT Manuale d'uso

Operation

The JamMan Express XT was designed to be very simple to use right out of the box� This

section of the manual describes how to perform the basic looping functions�

Recording a Phrase

The JamMan Express XT records a single phrase and then plays it back as a continuous loop�

To record a phrase:

1� Press the

FOOTSWITCH

solid red and recording will begin�

2� When finished recording, press the

phrase will automatically begin playing back in a repeating loop and the

light solid green�

3� Press the

FOOTSWITCH

NOTE: The maximum phrase recording length is 10 minutes�

Clearing a Phrase

Clear a phrase to re-record it or record a new phrase� The JamMan Express XT has a

unique feature, referred to as "Silent Clear

to play it first� Note that you cannot undo the process of clearing a phrase, so make sure

you want to proceed before performing this function�

To clear a recorded phrase:

1� Stop loop playback if it is not already (all LEDs should be off)� If loop playback is active

(the

PLAY LED

2� Press and hold the

indicating the phrase has been cleared�

NOTE: When using a slave/master looper setup, if the master loop is ~3 seconds or less

and if pressing and holding the

clear on the slave device, you may need to initiate play then stop (3

presses) and hold the footswitch on the 3rd press to clear its loop�

and begin playing to start recording� The

2 times quickly to stop loop playback�

is on), press the

FOOTSWITCH

once to set the loop end point� The

FOOTSWITCH

™

", which clears a phrase without requiring you

2 times to stop loop playback�

for ~2 seconds� The

from a stopped state does not initiate

REC LED

PLAY LED

will quickly flash red,

REC LED

FOOTSWITCH

will light

will